Intel S9256WK1HLC Server System UEFI SUP 22.01.0091
Tipo di file: Driver.
Sistema Operativo: AnyOS.
Nome del file: S9200WK_EFI_BIOS_22010091_ME_04.01.04.339.0_BMC_2.30.2c47d134_FRU_0.23.zip.
Bit: 32/64 Bit.
Licenza: Gratis.
Descrizione
versioni:
– System BIOS: 22010091
– ME Firmware: 04.01.04.339.0
– BMC Firmware: Purley_2.30.2c47d134
– FRUSDR: S9200WK_0.23_FRUSDR
BMC Changes:
– Reduced CPU VRD temperature limits UNC from 110 to 105
– Reduced CPU VRD temperature limits UC from 115 to 110
– Reduced Memory VRD temperature limits UNC from 110 to 103
– Reduced Memory VRD temperature limits UC from 115 to 107
– Fixed typo in VCCIO voltage sensor name A_PVCCIO_CPU1_D1_SENSOR -> A_PVCCIO_CPU1_D0_SENSOR.
– Enable MAX11617 voltage sensor support average.
– Enable average for PVCCIO_CPU0 and PVCCIO_CPU1 PVNN_PCH_AUX P1V05_PCH_AUX P1V8_PCH P12V_AUX
– MAX11617 VCCIO tolerance changed to +/-17%
GENERAL INSTALLATION PROCEDURE
1. Unzip the contents of the update package and copy all files to the root directory of a removable media (USB flash drive)
2. Insert the USB flash drive to any available USB port on the system to be updated
3. Power on the server and load the uEFI shell
4. Begin the update process running the Startup.nsh
5. Reboot the system after the update process has successfully completed
Web GUI update
1. Unzip the package onto your system
2. Log into the BMC web GUI
3. Navigate to Configuration, then Firmware Update
4. Click browse, and direct the browser to the location of Purley_1.04.f80688d0.bin
5. Click upload. Progress and status will be shown as the update progresses
UEFI update
1. Unzip package and load onto a flash drive
2. Boot to UEFI shell, and navigate to the folder where this package lives
3. Run fwUpdateBMC.nsh and follow the prompts
Verifying Updates:
01. After the final update has completed successfully, reboot the system
02. During POST, hit the <F2> Key when prompted to access the BIOS Setup Utility
03. From the BIOS Setup Utility main menu, hit the <F9> key to load BIOS defaults
04. Hit the <F10> key to Save Changes and Exit the BIOS defaults
04. At the main menu verify the BIOS revision is correct
05. Move cursor to the SERVER MANAGEMENT menu and hit Enter
06. Move cursor to the SYSTEM INFORMATION Option and hit Enter
07. Verify the BMC Firmware revision is correct
08. Verify the SDR revision is correct
09. Verify the ME Firmware revision is correct
10. Configure desired BIOS Option settings
11. Hit the F10 Key to Save Changes and Exit
Download