Intel LSVRP4304ES6XX1 Server System OFU BIOS/Firmware 03.01.0049
Tipo di file: Firmware.
Sistema Operativo: AnyOS.
Nome del file: S1200SPO_SPL_SPS_FSUP_BIOSR03010049_ME040104109_BMC0118r12306_FRUSDR028.zip.
Bit: 32/64 Bit.
Licenza: Gratis.
Descrizione
versioni:
– BIOS: 03.01.0049
– ME: 04.01.04.109
– BMC: 01.18.12306
– FRUSDR: V0.28
Changes in BIOS 03.01.R0049:
– [HSD-ES][2103632646] The BMC Firmware Revision&SDR Revision not hidden in POST Information under KCS Deny All mode.
– [HSD-ES][2103633189] FDD always are attached to the end of boot options after F9 under UEFI mode.
– [HSD-ES][1507958726] Run command “chipsec_main.py” and find module “igd_config0” failed.
– [HSD-ES][1507966668] [S1200SP][Point Release]S1200SP Point release based on 03.01.R4042 +Fixed the Overclocking MSR lock issue.
– Update RC code to 4.1.1.3
– [HSD-ES][1508038822] [S1200SP]Failed to set BIOS Knobs using syscfg in OS level.
– [HSD-ES][2103632569] Most changed settings return default when online update BIOS from D03.01.0042 to D03.01.0046.
– [HSD-ES][1507959325] Add new KCS policy done_core flage in BT.
– [HSD-ES][2103632613] [KCS] “Set Fan Profile” and “Fan PWM Offset” options not be Suppressed under Deny All mode
– [HSD-ES][1507032908][S1200SP][D0040]System become unresponsive when flash the modified BIOS capsule that change offset 0x70 value from 00 to 4F
– [HSD-ES][1507197468] FW-UEFI-Vuln-2019-115 [BDBA] Intel Server Board S1200SP Family – System Firmware Update Package Bridge SFUP for Intel OFU – BIOS 03.01.2032, ME FW 04.01.04.054
– [HSD-ES][1507218688] Include PRT patch Intel Server and Workstation Processors Microcode Update Rev. Production SRV_P_285 to Silver Pass 2019 QSBR
– [HSD-ES][1507195984] [Security] Race conditions in VariableInterface() allow arbitrary writes inside of SMRAM
– [HSD-ES][1507238750] The copyright should be Copyright (c) 2010-2019 instead of Copyright(c)2010-2018
– [HSD-ES][1607385130] Update Security version to 8
– [HSD-ES][1607423701] Silver Pass debug BIOS will assert in DXE FwBlockService
– Update for IPU 2019.2.
– [HSD-ES][1507689912]The copyright should be Copyright (c) 2010-2020 instead of Copyright 2010-2019.
Changes in ME 04.01.04.109:
1. 111153 SPS ME FW sometimes stop send E2 get OEM power reading cmd to BMC
2. IPMI F5h – Get PMBus Readings command may result in non-zero Completion Code
3. 1808702257 Policy ID 0 disappear after OS restart when parameter Domain HW Protection Enabled is set to False
4. 1808695866 ME FW is non responsive on SMLink0 in S5 after G3 after SPI image flash followed by CMOS clear
Changes in BMC 01.18.12306:
– web page copyright date wrong problem.
– [BMC]The SSH connection will be closed automatically after issuing some commands.
– [BMC][H1 761356] buffer overflow in usbe.ko leads to remote code execution.
– always https by default.
– Similar fix with 2103632313:[Grantley][BMC]The SSH connection will be closed automatically after issuing some commands.
– RED team report 2 security issues (File upload and Authentication Bypass)
– It can not receive the DHCP IPv6 IP when update the BMC_1.17.12281 version
– KCS PSIRT enhancement that is for core-bios-done possible security attack
– Implement 2 features: one is Cipher suite 3 support option in web console, second one is RMCP enable/disable option in web console
Changes in FRUSDR 0.28:
– Display version 0.24 in flash interface when flash Frusdr version 0.25.
Please follow the below procedure to update ME using UEFI iFlash32 14.0 Build 11
1. Boot the system to EFI Shell
2. Download ME release package
3. Unzip the ME release package to HD or USB Flash Drive
4. Map the respective storage device in system with the command Shell> map -r
5. Change the Shell to mapped device file system Example: Shell> fs0: (or fs1:)
6. Run the IFlash32 utility on the prompt. Use ME_xx_xx_xx_xxx.cap file when ME operational Image update is required. Use MEComplete_xx_xx_xx_xxx.cap file when Only whole ME Image update is required. fs0:> IFlash32 [File Name] /u /ni
7. Reboot system after the update is completed.
Use OFU to update system firmware by the following steps:
– Install OFU on Windows or Linux system
– Download the latest firmware update package from http://downloadcenter.intel.com/
– Unzip package to a folder
– Run the following command in Windows command line/Linux terminal window: <OFU install folder name>:flashupdt -u <package folder name>flashupdt.cfg
To update from Windows Preboot Execution Environment (WinPE)
The System Firmware Update Package can be inserted to Windows PE customized image for creating a bootable Windows PE CD. User is able to update system firmware from customized WinPE CD by the following steps:
– Boot server with customized WinPE CD
– Run script “WinPE21_x64_Update.bat” or “WinPE20_x86_Update.bat” (name may be varied depends on your own customization)
Download