Humax HDR Fox-T2 Digital Recorder Custom Firmware 1.02.20_mod/3.02
Tipo di file: Firmware.
Sistema Operativo: AnyOS.
Nome del file: HDR_FOX_T2_1.02.20_mod_3.02.zip.
Bit: 32/64 Bit.
Licenza: Gratis.
Descrizione
Correzioni:
– Improve bringing up Wi-Fi connection in maintenance mode;
Thanks are due to Black Hole for the legwork in tracking the root cause of this issue down in the first place and to MontysEvilTwin for testing release candidates and providing valuable feedback;
– Display Wi-Fi on the front panel in maintenance mode, prior to displaying the IP address, if only a Wi-Fi connection is found;
– Show ENTERING MAINTENANCE MODE on front panel during maintenance mode boot;
– Add dlna command to the HDR maintenance mode menu to clear the DLNA database. Useful if you do a monthly maintenance boot for housekeeping (e.g. clear epg, clear dlna, check disk);
– Upgrade embedded telnet menu;
– Removed checks related to legacy mongoose web server;
Install Firmware:
– Scarica il firmware and, if it is a zip file, extract it
– Ensure the resulting file is named HDR_FOX_T2_Upgrade.hdf
– Place the file in the root of a FAT32 formatted USB Flash / disk Drive *
– Put the unit into standby using the remote or the central ‘big button’ on the Unit
– Make sure that the unit has completely shut down by listening for the hard drive to power down (accompanied by a click)
– Remove all USB devices
– Plug the USB Flash Device containing the HDF file into a USB port
– Turn on the TV and switch to the Humax input
– Start up the Humax using the big button on the front of the unit (not by using the remote control)
– The software update should begin automatically and the progress shown on the TV screen
– The initial download is very quick and then programming takes 2-3 minutes
– Pauses in the percentage time bar are quite normal
– When the update is complete End will appear on the front display and Success Downloading! will appear on the TV
– Unplug the USB Flash Device containing the HDR_FOX_T2_Upgrade.hdf file
– re-connect any other USB devices e.g. Wi-Fi adadper, Hard disk Drives etc. (ensure that the HDF file is not present)
– Press the big button on the front again to restart with the new firmware
Some USB Flash / Disk Drives are reported not to work, The reason for this is not fully understood, However the following Tips are known to help:
– Ensure no other USB devices are connected
– Do not use a USB extender cable
– Removing all other files / full-formatting can prevent file fragmentation
– Try both USB ports (HDR)
– Smaller capacity drives seem to work more successfully than large ones
– Last Resort, Try a different USB Flash Drive
Download