HP ProLiant MicroServer Gen8 iLO 4 Firmware 2.02
Tipo di file: Firmware.
Sistema Operativo: Windows Server 2008, Windows Server 2012.
Nome del file: cp024169.exe.
Bit: 32/64 Bit.
Licenza: Gratis.
Descrizione
This component provides and installs an updated version of firmware for the iLO 4 Management Processor allowing for continued management support of your Server.
Enhancements:
– The following condition was added for DIMMs: “Good, Partially in Use.”
– The RIBCL Get Embedded Health has been updated for the following AMP modes: Channel Sparing, Rank Sparing, Intrasocket Mirroring, and Intersocket Mirroring.
Correzioni:
– The iLO Link-Local IPv6 address is displayed during POST when iLO is using the Shared Network Port, but the Shared Network Port does not support IPv6.
– The inlet air sensor is not displayed on the temperature graph.
– The Memory page is displayed incorrectly on ProLiant DL580 Gen8 servers.
– The following message appears during POST after RBSU changes are made and the IML is cleared: iLO FW communication issue-Unable to communicate with iLO FW.
– A “repaired” message is automatically posted to the IML after a Critical Fan Event.
– Power button actions do not respond in the HP RESTful API.
– IPMI Alert Immediate (Get Alert Status) always returns an error completion code.
– Component firmware flash status is not shown at the bottom of the iLO web interface window.
– The Remote Console crashes when a URL greater than 256 bytes is mounted.
– Multiple 6064 SNMP Correctable Memory Error Trap occur when only one is expected.
– iLO RBSU incorrectly provides the Transceiver Speed Autoselect menu option when the server uses Shared Network Port mode.
– An incorrect error message is displayed when the boot order is changed by a user without the Configure iLO Settings privilege.
– The Enable Active Health System logging check box and Apply button are active when the Active Health System has been disabled in hardware by using a motherboard switch.
– Fan Blowout during POST due to a jammed rotor continues to occur when the OS is running and the rotor has been repaired.
– iLO RBSU does not correctly check user privileges.
– iLO RBSU incorrectly uses a maximum of 19 characters for user names.
– The embedded Remote Support services fails to detect an Uncorrectable memory error event.
– Cache module status is displayed for HP Dynamic Smart Array B140i Controllers.
– Storage configuration changes are not updated in iLO until the server OS is started.
– There are virtual media mounting problems when using the HP RESTful API.
– Multiple mismatched power supplies are not detected.
– The Active Health System page shows the estimated size of entire log file as Unknown.
– The iLO web interface crashes when a user browses to the Memory page.
– The Join Group button on the Administration > iLO Federation page is unavailable until the browser is refreshed.
– A 404 error occurs when the HP RESTful API is used to access any path underneath /rest/v1/systems/1/bios.
For best performance and IPv6 support, HP recommends upgrading to the latest versions of the iLO utilities:
– HPQLOCFG 1.20 (replaced CPQLOCFG)
– HP Lights-Out XML Scripting Sample 4.40 bundle
– HPONCFG 4.4.0.0
– LOCFG.PL 4.40 (included in the HP Lights-Out XML Scripting Sample bundle)
– HPLOMIG 4.40 (upgrade HPLOMIG before installing this version of iLO 4)
Networking Features supported by IPv6 in this release:
– IPv6 Static Address Assignment
– IPv6 SLAAC Address Assignment
– IPv6 Static Route Assignment
– IPv6 Static Default Gateway Entry
– DHCPv6 Stateful Address Assignment
– DHCPv6 Stateless DNS, Domain Name, and NTP Configuration
– Integrated Remote Console
– OA Single Sign-On
– HP-SIM Single Sign-On
– Web Server
– SSH Server
– SNTP Client
– DDNS Client
– RIBCL over IPv6
– SNMP
– AlertMail
– Remote Syslog
– WinDBG Support
– CPQLOCFG/HPLOMIG over an IPv6 connection
– Scriptable Virtual Media
– CLI/RIBCL Key Import over IPv6
– Authentication using LDAP and Kerberos over IPv6
– iLO Federation
Networking Features not supported by IPv6 in this release:
– IPv6 Over Shared Network Port Connections
– IPMI
– NETBIOS-WINS
– Enterprise Secure Key Manager (ESKM) Support
– Embedded Remote Support (ERS)
Upgrade Requirement:
– Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.
Download