Gigabyte Z390 Gaming X (rev. 1.0) Intel Serial IO Driver 30.100.1915.1 per Windows 10 64-bit
Tipo di file: Driver.
Sistema Operativo: Windows 10.
Nome del file: mb_driver_chipset_serialio_30.100.1915.1_v1.zip.
Bit: 64 Bit.
Licenza: Gratis.
Descrizione
Caratteristiche principali:
– Supports 9th and 8th Gen Intel Core Processors
– Dual Channel Non-ECC Unbuffered DDR4
– New 10+2 Phases Digital PWM Design
– Dual Ultra-Fast M.2 with PCIe Gen3 X4 (1 with Thermal Guard) & SATA interface
– 2-Way CrossFire Multi-Graphics Support with PCIe Armor and Ultra Durable Design
– Intel Native USB 3.1 Gen2 Type-A
– Intel GbE LAN with cFosSpeed Internet Accelerator Software
– Ultra Durable 25KV ESD and 15KV Surge LAN Protection
– High Quality Audio Capacitors and Audio Noise Guard with LED Trace Path Lighting
– Support RGB Lighting Effect in Full Colors
– CEC 2019 Ready, Save Power With a Simple Click
– Smart Fan 5 features Multiple Temperature Sensors and Hybrid Fan Headers with FAN STOP
– Lightning-Fast Intel Thunderbolt 3 AIC Support
– Intel Optane Memory Ready
Questo pacchetto contiene i file necessari per l’installazione del driver Intel Serial IO. Se è stato installato, l’aggiornamento (sovrascrittura-installazione) può risolvere problemi, aggiungere nuove funzioni o espandere quelle esistenti. Anche se altri sistemi operativi potrebbero essere anche compatibili, non è consigliabile applicare questa versione su piattaforme diverse da quelle specificate.
Driver Installation via Installer:
– Copy and unzip the Intel Serial IO Driver onto the Platform under test.
– Locate the “SetupSerialIO.exe” file.
– Right click on the executable and select ‘Run as administrator’ option from the menu to start the installer and then click on ‘Yes’ button in User Account Control pop-up window.
– You should see welcome screen with component details. Click ‘Next >’ button to continue the installation.
– Next, you should see license agreement screen. Please review the license agreement and if you accept the license terms then check the check-box on “I accept the terms in the license Agreement” and click on the “Next >” button to continue the installation.
– Next, you can select the folder location where the driver will be installed. By default, the driver will be installed in c:program FilesIntelIntel Serial IO. Click on “Next >” button to continue installation.
– Next, a list of driver components that will be installed by the installer is displayed. Click on ‘Next >’ button to continue.
– After successful installation, you should see setup completion screen. Click on ‘Finish’ button to complete the installation.
Silent Driver Installation via Installer
– Copy and unzip the Intel Serial IO Driver onto the Platform under test.
– Open a Command Prompt (cmd.exe) with administrator rights (ie. Run as administrator). Click on ‘Yes’ button in User Account Control pop-up window.
– Change the directory to where you unzipped the driver in Step 1 and then change to the “Driver_Installer” directory.
– To see all available options for the Installer, run command “SetupSerialIO.exe -?”
– You should see a window pop-up. For the “-l <LCID>” option which specifies the language of the setup dialogs, the LCID list is shown in below table. Click OK to continue.
– Run command “SetupSerialIO.exe –b –s” to start the silent installation. (Where as x represents the particular version number.) This process should take about 1 min to complete. When silent installation is complete, the system will automatically reboot.
– After the system has booted, you can refer to section 0 to check the driver version.
Manual Installation via INF File:
– Copy and unzip the Intel Serial IO Driver onto the Platform under test.
– Locate the INF files. (iaLPSS_GPIO.inf, iaLPSS_I2C.inf, iaLPSS_SPI.inf, iaLPSS_UART2.inf)
– Right click on the INF file and select ‘Install’ option from the menu to start the installation and then click on ‘Yes’ button in pop-up window.
– After the installation of all the drivers, reboot the system.
Download