Gigabyte GA-X99-UD4 (rev. 1.0) Intel Chipset Driver 10.0.20
Tipo di file: Driver.
Sistema Operativo: Windows 7, Windows 8, Windows 8.1.
Nome del file: mb_driver_chipset_intel_x99.zip.
Bit: 64 Bit.
Licenza: Gratis.
Descrizione
specifiche tecniche:
CPU:
– Supporto per Intel Core i7 processors in the LGA2011-3 package
– L3 cache varies with CPU
Chipset:
– Intel X99 Express Chipset
Memory:
– 8 x DDR4 DIMM sockets supporting up to 64 GB of system memory
– 4 channel memory architecture
– Supporto per DDR4 3000(O.C.) / 2800(O.C.) / 2666(O.C.) / 2400(O.C.) / 2133 MHz memory modules
– Supporto per non-ECC memory modules
– Supporto per Extreme Memory Profile (XMP) memory modules
– Supporto per RDIMM 1Rx8 memory modules (operate in non-ECC mode)
Audio:
– Realtek ALC1150 codec
– High Definition Audio
– 2/4/5.1/7.1-channel
– Supporto per S/PDIF Out
LAN:
– Intel GbE LAN chips (10/100/1000 Mbit)
Expansion Slots:
– 2 x PCI Express x16 slots, running at x16 (PCIE_1, PCIE_2)
– 2 x PCI Express x16 slots, running at x8 (PCIE_3, PCIE_4)
– 3 x PCI Express x1 slots
– 1 x M.2 Socket 1 connector for the wireless communication module (M2_WIFI)
Multi-Graphics Technology:
– Supporto per 4-Way/3-Way/2-Way AMD CrossFire/NVIDIA SLI technology
Storage Interface:
– 1 x M.2 PCIe connector
– 1 x SATA Express connector
– 6 x SATA 6Gb/s connectors (SATA3 0~5)
– Supporto per RAID 0, RAID 1, RAID 5, and RAID 10
– 4 x SATA 6Gb/s connectors (sSATA3 0~3), supporting IDE and AHCI modes only
USB:
– 4 x USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header)
– 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)
– Chipset + Renesas uPD720210 USB 3.0 Hub:
– 4 x USB 3.0/2.0 ports on the back panel
Internal I/O Connectors:
– 1 x 24-pin ATX main power connector
– 1 x 8-pin ATX 12V power connector
– 1 x PCIe power connector
– 1 x I/O shield audio LED power connector
– 1 x heatsink LED power connector
– 1 x M.2 Socket 3 connector
– 1 x SATA Express connector
– 10 x SATA 6Gb/s connectors
– 1 x CPU fan header
– 1 x water cooling fan header (CPU_OPT)
– 3 x system fan headers
– 1 x front panel header
– 1 x front panel audio header
– 1 x USB 3.0/2.0 header
– 2 x USB 2.0/1.1 headers
– 1 x Trusted Platform Module (TPM) header
– 1 x Thunderbolt add-in card connector
– 1 x Clear CMOS jumper
Back Panel Connectors:
– 1 x PS/2 keyboard port
– 1 x PS/2 mouse port
– 6 x USB 3.0/2.0 ports
– 4 x USB 2.0/1.1 ports
– 1 x RJ-45 port
– 1 x optical S/PDIF Out connector
– 5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In, Line Out, Mic In)
– 2 x Wi-Fi antenna connector holes
I/O Controller:
– iTE I/O Controller Chip
H/W Monitoring:
– System voltage detection
– CPU/System/Chipset temperature detection
– CPU/CPU OPT/System fan speed detection
– CPU/System/Chipset overheating warning
– CPU/CPU OPT/System fan fail warning
– CPU/CPU OPT/System fan speed control
Form Factor:
– ATX Form Factor: 30.5cm x 24.4cm
Download