Gigabyte GA-M52L-S3P (rev. 2.3) Nvidia SATA AHCI Preinstall Driver 15.56 per Windows 7 x86
Tipo di file: Driver.
Sistema Operativo: Windows 7.
Nome del file: motherboard_driver_ahci_nvidia_mcp68_bootdisk_win7-32bit.exe.
Bit: 32/64 Bit.
Licenza: Gratis.
Descrizione
CPU
– Supporto per Socket AM3/ AM2+/ AM2 processors: AMD PhenomII processor/ AMD Phenom / AMD AthlonII processor/ AMD Athlon processor/ AMD Sempron processor
*Note: If you install AMD AM3/AM2+ CPU on AM2 motherbord, the system bus speed will downgrade from HT3.0(5200MT/s) to HT1.0(2000 MT/s) spec; however, the frequency of AM3/AM2+ CPU will not be impacted. Please refer “CPU Support List” for more information.
Hyper Transport Bus
– 2000 MT/s
Chipset
– NVIDIA nForce 520LE chipset
Memory
– 4 x 1.8V DDR2 DIMM sockets supporting up to 16GB of system memory (Note 1)
– Dual channel memory architecture
– Supporto per DDR2 1066/800 MHz memory modules
Audio
– Realtek ALC892 codec
– High Definition Audio
– 2/4/5.1/7.1-channel
– Supporto per S/PDIF In/Out
– Supporto per CD In
LAN
– Realtek RTL 8201 chip (10/100 Mbit)
Expansion Slots
– 1 x PCI Express x16 slot, running at x16
– 2 x PCI Express x1 slot
– 4 x PCI slots
Storage Interface
Integrated in the chipset:
– 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
– 2 x SATA 3Gb/s connectors supporting up to 2 SATA 3Gb/s devices
– Supporto per SATA RAID 0 and RAID 1
iTE IT8720 chip:
– 1 x floppy disk drive connector supporting up to 1 floppy disk drive
USB
Integrated in the chipset
– Up to 8 USB 2.0/1.1 ports (4 on the back panel, 4 via the USB brackets connected to the internal USB headers)
Internal I/O Connectors
– 1 x 24-pin ATX power connector
– 1 x 4-pin ATX 12V power connector
– 1 x floppy disk drive connector
– 1 x IDE connector
– 2 x SATA 3Gb/s connectors
– 1 x CPU fan header
– 1 x system fan header
– 1 x power fan header
– 1 x front panel header
– 1 x front panel audio header
– 1 x CD In connector
– 1 x S/PDIF In header
– 1 x S/PDIF Out header
– 2 x USB 2.0/1.1 headers
– 1 x clearing CMOS jumper
Back Panel Connectors
– 1 x PS/2 keyboard port
– 1 x PS/2 mouse port
– 1 x parallel port
– 1 x serial port
– 1 x coaxial S/PDIF Out
– 4 x USB 2.0/1.1 ports
– 1 x RJ-45 port
– 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line Out/Microphone)
I/O Controller
– IT8720 chip
H/W Monitoring
– System voltage detection
– System temperature detection
– CPU / System fan speed detection
– CPU / System overheating warning
– CPU / System fan failure warning
– CPU / system fan speed control (Note 2)
BIOS
– 2 x 8Mbit flash
– Use of licensed AWARD BIOS
– Supporto per DualBIOS
– PnP 1.0a, DMI 2.0, SM BIOS 2.3, ACPI 1.0b
Unique Features
– Supporto per @BIOS
– Supporto per Q-Flash
– Supporto per Xpress BIOS Rescue
– Supporto per Download Center
– Supporto per Xpress Install
– Supporto per Xpress Recovery2
– Supporto per EasyTune (Note 3)
– Supporto per Auto Green
– Supporto per On/Off Charge
Bundle Software
– Norton Internet Security (OEM version)
Form Factor
– ATX form factor; 30.5cm x 21.5cm
Note
(Note 1) Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB.
(Note 2) Whether the CPU / system fan speed control function is supported will depend on the CPU cooler you install.
(Note 3) Available functions in EasyTune may differ by motherboard model.
Si consiglia vivamente di utilizzare sempre la versione del driver più recente disponibile.
Non dimenticare di controllare il nostro sito il più spesso possibile per rimanere aggiornato sui driver, software e giochi più recenti.
Provare a impostare un punto di ripristino del sistema prima di installare un driver di periferica. Questo aiuterà se hai installato un driver sbagliato. I problemi possono sorgere quando il dispositivo hardware è troppo vecchio o non è più supportato.
Download