Gigabyte GA-H61MA-D3V (rev. 2.1) Etron USB 3.0 Driver 1.0.0.0109
Tipo di file: Driver.
Sistema Operativo: Windows 7, Windows Vista, Windows XP.
Nome del file: motherboard_driver_etron_usb3.exe.
Bit: 64 Bit.
Licenza: Gratis.
Descrizione
CPU
– Supporto per Intel Core i7 processors/Intel Core i5 processors/ Intel Core i3 processors/Intel Pentium processors/Intel Celeron processors in the LGA1155 package
– L3 cache varies with CPU
Chipset
– Intel H61 Express Chipset
Memory
– 2 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory
* Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB.
– Dual channel memory architecture
– Supporto per DDR3 1333/1066/800 MHz memory modules
– Supporto per non-ECC memory modules
– Supporto per Extreme Memory Profile (XMP) memory modules
* To support XMP memory, you must install an Intel 22nm (Ivy Bridge) CPU.
Onboard Graphics
Integrated Graphics Processor:
– 1 x D-Sub port
– 1 x DVI-D port, supporting a maximum resolution of 1920×1200
* The DVI-D port does not support D-Sub connection by adapter.
Audio
– Realtek ALC887 audio codec
– High Definition Audio
– 2/4/5.1/7.1-channel
* To enable 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver.
LAN
– 1 x Realtek 8111E/8111F chip (10/100/1000 Mbit)
Expansion Slots
– 1 x PCI Express x16 slot, running at x16
(The PCI Express x16 slot conforms to PCI Express 3.0 standard.)
* To support PCI Express 3.0, you must install an Intel 22nm CPU.
– 3 x PCI Express x1 slots
(The PCI Express x1 slots conform to PCI Express 2.0 standard.)
Storage Interface Chipset:
– 4 x SATA 3Gb/s connectors (SATA2 0/1/2/3) supporting up to 4 SATA 3Gb/s devices
Marvell 88SE9172 chip:
– 2 x SATA 6Gb/s connectors (GSATA3 0/1) supporting up to 2 SATA 6Gb/s devices
– Supporto per RAID 0 and RAID 1
USB Chipset:
– Up to 8 USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)
Etron EJ168 chip:
– Up to 2 USB 3.0/2.0 ports on the back panel
Internal I/O Connectors
– 1 x 24-pin ATX main power connector
– 1 x 4-pin ATX 12V power connector
– 4 x SATA 3Gb/s connectors
– 2 x SATA 6Gb/s connectors
– 1 x CPU fan header
– 1 x system fan header
– 1 x front panel header
– 1 x front panel audio header
– 2 x USB 2.0/1.1 headers
– 1 x Clear CMOS jumper
Back Panel Connectors
– 1 x PS/2 keyboard/mouse port
– 1 x D-Sub port
– 1 x DVI-D port
– 4 x USB 2.0/1.1 ports
– 2 x USB 3.0/2.0 ports
– 1 x RJ-45 port
– 3 x audio jacks (Line In/Line Out/Microphone)
I/O Controller
– iTE I/O controller chip
H/W Monitoring
– System voltage detection
– CPU/System temperature detection
– CPU/System fan speed detection
– CPU overheating warning
– CPU/System fan fail warning
– CPU/System fan speed control
* Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install.
BIOS
– 2 x 32 Mbit flash
– Use of licensed AMI EFI BIOS
– Supporto per DualBIOS
– PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a
Bundle Software
– Norton Internet Security (OEM version)
Unique Features
– Supporto per @BIOS
– Supporto per Q-Flash
– Supporto per Xpress Recovery2
– Supporto per EasyTune
* Available functions in EasyTune may differ by motherboard model.
– Supporto per ON/OFF Charge
Form Factor
– Micro ATX Form Factor; 24.4cm x 17.4cm
Si consiglia vivamente di utilizzare sempre la versione del driver più recente disponibile.
Non dimenticare di controllare il nostro sito il più spesso possibile per rimanere aggiornato sui driver, software e giochi più recenti.
Provare a impostare un punto di ripristino del sistema prima di installare un driver di periferica. Questo aiuterà se hai installato un driver sbagliato. I problemi possono sorgere quando il dispositivo hardware è troppo vecchio o non è più supportato.
Download