Gigabyte GA-990FXA-UD3 (rev. 1.0) Marvell AHCI/RAID Driver 4.1.0.2018
Tipo di file: Driver.
Sistema Operativo: Windows 7, Windows 8, Windows 8.1, Windows Vista, Windows XP.
Nome del file: mb_driver_marvell_sata_91xx.exe.
Bit: 64 Bit.
Licenza: Gratis.
Descrizione
specifiche tecniche:
CPU:
– AM3+ Socket:
– Supporto per AMD AM3+ FX processors
– Supporto per AMD AM3 Phenom II processors / AMD Athlon II processors
Hyper Transport Bus:
– 5200 MT/s
Chipset:
– North Bridge: AMD 990FX
– South Bridge: AMD SB950
Memory:
– 4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory
– Dual channel memory architecture
– Supporto per DDR3 2000(O.C.)/1866/1600/1333/1066 MHz memory modules
Audio:
– Realtek ALC889 codec
– High Definition Audio
– 2/4/5.1/7.1-channel
– Supporto per Dolby Home Theater
– Supporto per S/PDIF Out
LAN:
– 1 x Realtek RTL8111E chip (10/100/1000 Mbit)
Expansion Slots:
– 2 x PCI Express x16 slots, running at x16 (PCIEX16_1, PCIEX16_2)
– 2 x PCI Express x16 slots, running at x4 (PCIEX4_1, PCIEX4_2)
– 2 x PCI Express x1 slots
– 1 x PCI slot
Multi-Graphics Technology:
– Supporto per 2-Way AMD CrossFireX and NVIDIA SLI technology (PCIEX16_1, PCIEX16_2)
Storage Interface:
– 6 x SATA 6Gb/s connectors (SATA3_0~SATA3_5) supporting up to 6 SATA 6Gb/s devices
– Supporto per SATA RAID 0, RAID 1, RAID5, RAID 10 and JBOD
– 2 x Marvell 88SE9172 chips: 2 x eSATA 6Gb/s connectors on the back panel supporting up to 2 SATA 6Gb/s devices
– Supporto per RAID 0 and RAID 1
USB:
– Up to 14 USB 2.0/1.1 ports (8 ports on the back panel, 6 ports available through the internal USB headers)
– 2 x Etron EJ168 chips: Up to 4 USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header)
IEEE 1394:
– VIA VT6308 chip
– Up to 2 IEEE 1394a ports (1 port on the back panel, 1 port available through the internal IEEE 1394a header)
Internal I/O Connectors:
– 1 x 24-pin ATX main power connector
– 1 x 8-pin ATX 12V power connector
– 6 x SATA 6Gb/s connectors
– 1 x CPU fan header
– 2 x system fan headers
– 1 x power fan header
– 1 x front panel header
– 1 x front panel audio header
– 1 x S/PDIF Out header
– 3 x USB 2.0/1.1 headers
– 1 x USB 3.0/2.0 header
– 1 x IEEE 1394a header
– 1 x Trusted Platform Module (TPM) header
– 1 x serial port header
– 1 x clearing CMOS jumper
Back Panel Connectors:
– 1 x PS/2 keyboard/mouse port
– 1 x optical S/PDIF Out connector
– 1 x IEEE 1394 port
– 8 x USB 2.0/1.1 ports
– 2 x USB 3.0/2.0 ports
– 2 x eSATA 6Gb/s connector
– 1 x RJ-45 port
– 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line Out/Microphone)
I/O Controller:
– ITE IT8720 chip
H/W Monitoring:
– System voltage detection
– CPU/System temperature detection
– CPU/System/Power fan speed detection
– CPU overheating warning
– CPU/System/Power fan fail warning
– CPU/System fan speed control
Form Factor:
– ATX Form Factor: 30.5cm x 24.4c
Download