Gigabyte GA-880GM-UD2H (rev. 1.5) Realtek Ethernet Diagnostic Utilità 2.0.1.6
Tipo di file: Utilità.
Sistema Operativo: Windows 7, Windows Vista, Windows XP.
Nome del file: mb_driver_lan_realtek_rtltool.exe.
Bit: 64 Bit.
Licenza: Gratis.
Descrizione
CPU
– Supporto per AM3+/AM3 processors: AMD Phenom II processor/ AMD Athlon II processor
Hyper Transport Bus
– 5200 MT/s
Chipset
– North Bridge: AMD 880G
– South Bridge: AMD SB710
Memory
– 4 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory (Note 1)
– Dual channel memory architecture
– Supporto per DDR3 1800 (OC)/1333/1066 MHz memory modules (Note 2)
Onboard Graphics
Integrated in the North Bridge:
– 1 x D-Sub port
– 1 x DVI-D port (Note 3) (Note 4)
– 1 x HDMI port (Note 4)
Audio
– Realtek ALC892 codec
– High Definition Audio
– 2/4/5.1/7.1-channel
– Supporto per Dolby Home Theater
– Supporto per S/PDIF In/Out
– Supporto per CD In
LAN
– Realtek 8111D/E chip (10/100/1000 Mbit)
Expansion Slots
– 1 x PCI Express x16 slot, running at x16
– 1 x PCI Express x1 slot
(All PCI Express slots conform to PCI Express 2.0 standard.)
– 2 x PCI slots
Multi-Graphics Technology
– Supporto per ATI Hybrid CrossFireX technology
Storage Interface
South Bridge:
– 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
– 5 x SATA 3Gb/s connectors supporting up to 5 SATA 3Gb/s devices
– 1 x eSATA 3Gb/s port on the back panel supporting up to 1 SATA 3Gb/s device
– Supporto per SATA RAID 0, RAID 1, RAID 10 and JBOD
iTE IT8720 chip:
– 1 x floppy disk drive connector supporting up to 1 floppy disk drive
USB
South Bridge:
– Up to 12 USB 2.0/1.1 ports (6 on the back panel, 6 via the USB brackets connected to the internal USB headers)
IEEE 1394
T.I. TSB43AB23 chip:
– Up to 2 IEEE 1394a ports (1 on the back panel, 1 via the IEEE 1394a bracket connected to the internal IEEE 1394a header)
Internal I/O Connectors
– 1 x 24-pin ATX main power connector
– 1 x 8-pin ATX 12V power connector
– 1 x floppy disk drive connector
– 1 x IDE connector
– 5 x SATA 3Gb/s connectors
– 1 x CPU fan header
– 1 x system fan header
– 1 x front panel header
– 1 x front panel audio header
– 1 x CD In connector
– 1 x S/PDIF In/Out header
– 3 x USB 2.0/1.1 headers
– 1 x IEEE 1394a header
– 1 x serial port header
– 1 x clearing CMOS jumper
Back Panel Connectors
– 1 x PS/2 keyboard port or PS/2 mouse port
– 1 x D-Sub port
– 1 x DVI-D port (Note 3)(Note 4)
– 1 x HDMI port (Note 4)
– 1 x optical S/PDIF Out connector
– 1 x eSATA 3Gb/s port
– 1 x IEEE 1394a port
– 6 x USB 2.0/1.1 ports
– 1 x RJ-45 port
– 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line Out/Microphone)
I/O Controller
– ITE IT8720 chip
H/W Monitoring
– System voltage detection
– CPU/System temperature detection
– CPU/System fan speed detection
– CPU overheating warning
– CPU/System fan fail warning
– CPU/System fan speed control (Note 5)
BIOS
– 2 x 16 Mbit flash
– Use of licensed AWARD BIOS
– Supporto per DualBIOS
– PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b
Unique Features
– Supporto per @BIOS
– Supporto per Q-Flash
– Supporto per Xpress BIOS Rescue
– Supporto per Download Center
– Supporto per Xpress Install
– Supporto per Xpress Recovery2
– Supporto per EasyTune (Note 6)
– Supporto per Easy Energy Saver
– Supporto per Smart Recovery
– Supporto per Q-Share
– Supporto per Auto Green
Bundle Software
– Norton Internet Security (OEM version)
Form Factor
– Micro ATX Form Factor; 24.4cm x 24.4cm
Notes
(Note 1) Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB.
(Note 2) To reach DDR3 1800MHz or above, you must install two memory modules and install them in the DDR3_3 and DDR3_4 memory sockets.
(Note 3) The DVI-D port does not support D-Sub connection by adapter.
(Note 4) Simultaneous output for DVI-D and HDMI is not supported.
(Note5) Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install.
(Note 6) Available functions in EasyTune may differ by motherboard model.
Si consiglia vivamente di utilizzare sempre la versione del driver più recente disponibile.
Non dimenticare di controllare il nostro sito il più spesso possibile per rimanere aggiornato sui driver, software e giochi più recenti.
Provare a impostare un punto di ripristino del sistema prima di installare un driver di periferica. Questo aiuterà se hai installato un driver sbagliato. I problemi possono sorgere quando il dispositivo hardware è troppo vecchio o non è più supportato.
Download