Fujifilm X-Pro2 Camera Firmware 3.00
Tipo di file: Firmware.
Sistema Operativo: AnyOS.
Nome del file: FWUP0008.DAT.
Bit: 32/64 Bit.
Licenza: Gratis.
Descrizione
I cambiamenti:
– “Voice memo” function added
– “Copyright information” function added
– Improved operability of AF / movie shooting / viewfinder etc.
The firmware update Ver.3.00 from Ver.2.10 incorporates the following issues:
1. Shooting RAW in Bracketing and Advanced Filters
The update enables you to use the RAW format when shooting not only in AE Bracketing but also in other Bracketing modes (ISO, Dynamic Range, White Balance, Film Simulations) and also in Advanced Filter modes.
2. Extended ISO 125 and 160 selectable
The update adds ISO125 and ISO160 to extended ISO levels available.
3. Programmable long exposure of up to 15 minutes
Long exposure in the T mode currently goes only up to 30 seconds. The update will allow users to extend it up to 15 minutes.
4. “AUTO” setting added for the minimum shutter speed in the ISO Auto setting
The update adds an AUTO option for the minimum shutter speed in the ISO Auto setting, that allows the camera to automatically define the minimum shutter speed according to the focal length of the lens attached.
5. Faster “Face Detection AF”
The update enables the use of Phase Detection AF for faster performance in Face Detection AF.
6. Improved in-focus indication in the AF-C mode
The update reduces focus hunting in the AF-C mode, making it easier to track a subject.
7. Addition of a smaller Focus Point size in Single Point AF
The update adds a smaller Focus Point size in Single Point AF, bringing the total number of available sizes to six. The new smallest size facilitates pin-point focusing.
8. Addition of “AF Point Display”
With the update, you can choose to have AF Points constantly displayed in Zone AF and Wide / Tracking AF, making it easier to track a subject.
[How to set]
AF/MFSETTING>AF POINT DISPLAY
9. Addition of “AF-C Custom Setting”
The update adds “AF-C Custom Setting” for specifying focus-tracking characteristics. Choose from five presets according to your subject’s type of movements.
[How to set]
AF-C CUSTOM SETTING
10. Change of focus frame position while enlarging it
The update allows you to move the position of focus frame while enlarging it in Single Point in the AF-S mode or in the Manual Focus.
11. Addition of “Eye Sensor + LCD Image Display” in the View Mode
The update gives the “Eye Sensor + LCD Image Display” option in the View Mode that allows you to shoot through the viewfinder and check images on the LCD, just as you would with an SLR.
12. Shorter EVF display time-lag
The update shortens EVF display time-lag in the AF-C mode so that you will not miss a photo opportunity.
13. Name Custom Settings
The update allows you to assign a specific name to Custom Settings 1 – 7.
[How to set]
IMAGE QUALITY SETTING>EDIT/SAVE CUSTOM SETTING>CUSTOM1-7>EDIT CUSTOM NAME
14. Copyright information in EXIF data
The update allows you to register the photographer’s name and the copyright holder’s name in advance so that the camera automatically adds the information to EXIF data for each image.
[How to set]
SET UP>SAVE DATA SET-UP>COPYRIGHT INFO
15. Voice Memo function
The update enables you to record 30-second “Voice Memo” clips in the Playback mode.
[How to set]
PLAY BACK MENU>VOICE MEMO SETTING>ON
When recorded images are displayed, press the front command dial for a while to start memo recording. When you remove your finger from the dial, it stops.
16. Extended AE Bracketing
The update extends AE Bracketing from the current 3 frames +/-2EV to up to 9 frames +/-3EV.
17. Addition of “Shoot Without Card” mode
With the update, you can have the “Shoot Without Card” mode turned OFF so that the camera cannot shoot when there is no SD card inserted.
[How to set]
SET UP>BUTTON/DIAL SETTING>SHOOT WITHOUT CARD
Precauzioni:
– Se l’aggiornamento del firmware fallisce, la fotocamera potrebbe non funzionare più correttamente in alcuni casi. Carefully read the notes provided here.
– Utilizzare sempre la batteria completamente carica quando si aggiorna il firmware come base. Non spegnere mai la fotocamera o tentare di utilizzare uno dei controlli della fotocamera mentre il firmware viene sovrascritto.
– L’aggiornamento del firmware richiede circa 90 secondi.
– Una volta aggiornato il firmware, alcuni dati della versione precedente non possono essere ripristinati.
– Please check here if you encounter any problems.
Istruzioni per l’installazione:
– Inserisci la scheda di memoria formattata in uno slot per lettore di schede del tuo PC / Mac.
– Scarica il firmware
– Copia il file scaricato sulla scheda.
– Prelevare la scheda dallo slot del lettore di schede una volta completata la copia e metterla nella fotocamera.
– Utilizzare una batteria completamente carica. Se la fotocamera si spegne durante l’aggiornamento del firmware, non funzionerà correttamente.
– Il tempo per l’aggiornamento del firmware varia in base alla capacità del firmware, ma è di ca. 90 sec. Non spegnere mai la fotocamera e utilizzarla durante l’aggiornamento del firmware.
– Accendi la fotocamera premendo il tasto “DISP / BACK” per mostrare il display a destra. Quindi, premere il pulsante “MENU / OK”
– Dopo aver confermato la voce come [BODY] per aggiornare il corpo della fotocamera, premere il pulsante [OK].
– Premere il tasto [OK] per andare al passo successivo.
– Premere il tasto [UP] per selezionare “OK”.
– Premere il tasto [OK].
– L’aggiornamento del firmware è iniziato.
– Sono necessari circa 90 secondi per completare l’aggiornamento del firmware.
– Quando appare questa schermata, l’aggiornamento del firmware è stato completato con successo.
– Spegnere la fotocamera.
– Controllare il firmware aggiornato.
– Seguendo la procedura sopra riportata “Procedura di controllo della versione del firmware”, è possibile vedere la versione del firmware.
– Format the card.
Download