Fujifilm GFX 50R Camera Firmware 2.00
Tipo di file: Firmware.
Sistema Operativo: AnyOS.
Nome del file: GXUP0002.DAT.
Bit: 32/64 Bit.
Licenza: Gratis.
Descrizione
I cambiamenti:
– Fix of minor bugs
Expanding the use of outstanding image technology based on unique color reproduction
1) Addition of the new Film Simulation modes: “CLASSIC Neg” mode, simulating color negative film traditionally chosen for snapshots and “ETERNA / CINEMA” mode, which replicates the colors and tonality of Fujifilm’s motion picture film.
2) “Smooth Skin Effect,” featured on the GFX 100, will become available, smoothing the appearance of human skin, ideal for portraiture.
Improving autofocus performance
1) Addition of the Low Light Priority AF-S mode, extending exposure time during autofocus to improve AF accuracy in low light.
2) Improvement of the Face / Eye AF performance. The face / eye detection accuracy and stability are improved when shooting multiple people, so as to make portrait photography easier than ever before.
3) Auto mode will be added to focus bracketing. Specify the starting and ending points and shooting interval, and the camera can automatically determine the number of frames and steps required.
Expanding various other functions requested by customers
1) The firmware will allow users to adjust exposure settings (shutter speed, aperture value, ISO sensitivity, exposure compensation) for still images from a computer when using software that supports some tether-shooting functions.
2) More photo-editing applications will support the import of rating information, assigned in camera.
3) The maximum number of photos that can be saved in each folder on an SD card will increase 10 fold from 999 to 9,999.
4) When setting the color temperature in the White Balance setting, the value of the color temperature is also displayed.
Precauzioni:
– Se l’aggiornamento del firmware fallisce, la fotocamera potrebbe non funzionare più correttamente in alcuni casi.
– Utilizzare sempre la batteria completamente carica quando si aggiorna il firmware come base. Non spegnere mai la fotocamera o tentare di utilizzare uno dei controlli della fotocamera mentre il firmware viene sovrascritto.
– L’aggiornamento del firmware richiede circa 90 secondi.
– Una volta aggiornato il firmware, alcuni dati della versione precedente non possono essere ripristinati.
Istruzioni per l’installazione:
– Inserisci la scheda di memoria formattata in uno slot per lettore di schede del tuo PC / Mac.
– Scarica il firmware
– Copia il file scaricato sulla scheda.
– Prelevare la scheda dallo slot del lettore di schede una volta completata la copia e metterla nella fotocamera.
– Utilizzare una batteria completamente carica. Se la fotocamera si spegne durante l’aggiornamento del firmware, non funzionerà correttamente.
– Il tempo per l’aggiornamento del firmware varia in base alla capacità del firmware, ma è di ca. 90 sec. Non spegnere mai la fotocamera e utilizzarla durante l’aggiornamento del firmware.
– Accendi la fotocamera premendo il tasto “DISP / BACK” per mostrare il display a destra. Quindi, premere il pulsante “MENU / OK”
– Dopo aver confermato la voce come [BODY] per aggiornare il corpo della fotocamera, premere il pulsante [OK].
– Premere il tasto [OK] per andare al passo successivo.
– Premere il tasto [UP] per selezionare “OK”.
– Premere il tasto [OK].
– L’aggiornamento del firmware è iniziato.
– Sono necessari circa 90 secondi per completare l’aggiornamento del firmware.
– Quando appare questa schermata, l’aggiornamento del firmware è stato completato con successo.
– Spegnere la fotocamera.
– Controllare il firmware aggiornato.
– Seguendo la procedura sopra riportata “Procedura di controllo della versione del firmware”, è possibile vedere la versione del firmware.
– Formattare la carta.
Download