Foscam FI9851P IP Camera Firmware 2.x.2.30
Tipo di file: Firmware.
Sistema Operativo: AnyOS.
Nome del file: FI9821W-V2.1.zip.
Bit: 32/64 Bit.
Licenza: Gratis.
Descrizione
System firmware version: 1.5.3.19
App firmware version: 2.x.2.30
Plug-in version: 3.3.0.31
miglioramenti:
1. Optmized p2p;
2. Added button for obtain DDNS.
NOTE:
1) Keep power on when doing the upgrade, plug the network cable to upgrade your camera;
2) Do not upgrade the firmware via Internet;
3) Please restore to factory settings when finished upgrade; (Click the Factory Reset button under the System menu to do the restoration)
4) It need upgrade the plugin after the firmware upgrade, normally, the new plugin will prompt us to install it, if the plugin does not prompt up, please delete the old one first and install the new plugin;
How to upgrade firmware for Indoor PT camera
Preparation for upgrading:
1) Plug in the Ethernet cable to upgrade firmware, not via wireless.
2) Upgrade the system firmware firstly and web UI secondly.
3) Keep power on during the upgrading.
Method 1:
Upgrade firmware on IP Camera Tool
Step 1: Highlight and right click the camera and then go to Upgrade Firmware.
Step 2: Enter the user and password of camera. The default user is ‘admin’ and password is blank.
Step 3: Update System Firmware. Click Upgrade System Firmware select system firmware click Open. After reboot, the system firmware is loaded successfully.
Step 4: Upgrade Web UI. Repeat step and 2. Click Upgrade WEB UI select Web UI firmware click Open. After reboot, the Web UI is loaded successfully.
Step 5: You can check new firmware on Basic Properties. Highlight and right click the camera and then go to Basic Properties.
Method 2:
Update firmware on Upgrade Device Firmware.
Step 1: Log into camera, click Device Management Upgrade Device Firmware.
Step 2: Update System firmware. Click Browse select system firmware click Open click Submit. After reboot, the system firmware is loaded successfully.
Step 3: Update Web UI firmware. Click Browse select Web UI firmware click Open click Submit.
After reboot, the Web UI is loaded successfully.
Step 4: You can check new firmware on Device Status page.
Download