ASUS ZenBook 13 UX334FLC Intel Serial IO I2C Driver 30.100.1915.1 per Windows 10 64-bit
Tipo di file: Driver.
Sistema Operativo: Windows 10.
Nome del file: I2C_DCH_Intel_Win10_64_V3010019151.zip.
Bit: 64 Bit.
Licenza: Gratis.
Descrizione
Caratteristiche principali:
– Processor: Intel Core i7 10510U or i5 10210U
– Memory: 16 GB Onboard memory
– Display: 13.3″ (16:9) LED-backlit FHD (1920×1080) 60Hz Anti-Glare Panel with 72% NTSC with wide 178° viewing angles
– Graphics: NVIDIA GeForce MX250 , with 2GB GDDR3
– Solid state drive: 256GB / 512GB PCIe Gen3 x2 SSD or 1TB PCIe Gen3 x4 SSD
– Keyboard: Illuminated chiclet keyboard
– Card Reader:Multi-format card reader
– WebCam: IR camera
– Wi-Fi: Integrated Wi-Fi 6 (802.11 ax (2×2))
– Bluetooth: Bluetooth 5.0
Questo pacchetto contiene i file necessari per l’installazione del driver Intel Serial IO. Se è stato installato, l’aggiornamento (sovrascrittura-installazione) può risolvere problemi, aggiungere nuove funzioni o espandere quelle esistenti. Anche se altri sistemi operativi potrebbero essere anche compatibili, non è consigliabile applicare questa versione su piattaforme diverse da quelle specificate.
Driver Installation via Installer:
– Copy and unzip the Intel Serial IO Driver onto the Platform under test.
– Locate the “SetupSerialIO.exe” file.
– Right click on the executable and select ‘Run as administrator’ option from the menu to start the installer and then click on ‘Yes’ button in User Account Control pop-up window.
– You should see welcome screen with component details. Click ‘Next >’ button to continue the installation.
– Next, you should see license agreement screen. Please review the license agreement and if you accept the license terms then check the check-box on “I accept the terms in the license Agreement” and click on the “Next >” button to continue the installation.
– Next, you can select the folder location where the driver will be installed. By default, the driver will be installed in c:program FilesIntelIntel Serial IO. Click on “Next >” button to continue installation.
– Next, a list of driver components that will be installed by the installer is displayed. Click on ‘Next >’ button to continue.
– After successful installation, you should see setup completion screen. Click on ‘Finish’ button to complete the installation.
Silent Driver Installation via Installer
– Copy and unzip the Intel Serial IO Driver onto the Platform under test.
– Open a Command Prompt (cmd.exe) with administrator rights (ie. Run as administrator). Click on ‘Yes’ button in User Account Control pop-up window.
– Change the directory to where you unzipped the driver in Step 1 and then change to the “Driver_Installer” directory.
– To see all available options for the Installer, run command “SetupSerialIO.exe -?”
– You should see a window pop-up. For the “-l <LCID>” option which specifies the language of the setup dialogs, the LCID list is shown in below table. Click OK to continue.
– Run command “SetupSerialIO.exe –b –s” to start the silent installation. (Where as x represents the particular version number.) This process should take about 1 min to complete. When silent installation is complete, the system will automatically reboot.
– After the system has booted, you can refer to section 0 to check the driver version.
Manual Installation via INF File:
– Copy and unzip the Intel Serial IO Driver onto the Platform under test.
– Locate the INF files. (iaLPSS_GPIO.inf, iaLPSS_I2C.inf, iaLPSS_SPI.inf, iaLPSS_UART2.inf)
– Right click on the INF file and select ‘Install’ option from the menu to start the installation and then click on ‘Yes’ button in pop-up window.
– After the installation of all the drivers, reboot the system.
Download