ASUS VivoBook S14 S430UA Intel Serial IO UART Driver 30.100.1823.1 per Windows 10 64-bit
Tipo di file: Driver.
Sistema Operativo: Windows 10.
Nome del file: UART_Intel_kabylake_Win10_64_VER3010018231.zip.
Bit: 64 Bit.
Licenza: Gratis.
Descrizione
Caratteristiche principali:
– Processor: Intel Core i7-8550U, i5-8250U, or i3-8130U processor
– Graphics: Integrated Intel UHD Graphics 620
– Display: 14” LED-backlit Full HD (1920 x 1080) 16:9 matte display
– Memory: 4GB / 6GB / 8GB / 12GB / 16GB 2400MHz DDR4
– Dual Storage: 512GB / 256GB / 128GB SATA SSD + 1TB / 500GB HDD
– Keyboard: Full-size backlit (optional), with 1.4mm key travel
– Touchpad: Glass-covered with optional integrated fingerprint sensor supporting Windows Hello; intelligent palm-rejection
– Camera: HD webcam
– Wireless Connectivity: Dual-band 802.11ac Wi-Fi with advanced Wi-Fi Master technology
– Bluetooth: Bluetooth V4.2
Questo pacchetto contiene i file necessari per l’installazione del driver Intel Serial IO. Se è stato installato, l’aggiornamento (sovrascrittura-installazione) può risolvere problemi, aggiungere nuove funzioni o espandere quelle esistenti. Anche se altri sistemi operativi potrebbero essere anche compatibili, non è consigliabile applicare questa versione su piattaforme diverse da quelle specificate.
Driver Installation via Installer:
– Copy and unzip the Intel Serial IO Driver onto the Platform under test.
– Locate the “SetupSerialIO.exe” file.
– Right click on the executable and select ‘Run as administrator’ option from the menu to start the installer and then click on ‘Yes’ button in User Account Control pop-up window.
– You should see welcome screen with component details. Click ‘Next >’ button to continue the installation.
– Next, you should see license agreement screen. Please review the license agreement and if you accept the license terms then check the check-box on “I accept the terms in the license Agreement” and click on the “Next >” button to continue the installation.
– Next, you can select the folder location where the driver will be installed. By default, the driver will be installed in c:program FilesIntelIntel Serial IO. Click on “Next >” button to continue installation.
– Next, a list of driver components that will be installed by the installer is displayed. Click on ‘Next >’ button to continue.
– After successful installation, you should see setup completion screen. Click on ‘Finish’ button to complete the installation.
Silent Driver Installation via Installer
– Copy and unzip the Intel Serial IO Driver onto the Platform under test.
– Open a Command Prompt (cmd.exe) with administrator rights (ie. Run as administrator). Click on ‘Yes’ button in User Account Control pop-up window.
– Change the directory to where you unzipped the driver in Step 1 and then change to the “Driver_Installer” directory.
– To see all available options for the Installer, run command “SetupSerialIO.exe -?”
– You should see a window pop-up. For the “-l <LCID>” option which specifies the language of the setup dialogs, the LCID list is shown in below table. Click OK to continue.
– Run command “SetupSerialIO.exe –b –s” to start the silent installation. (Where as x represents the particular version number.) This process should take about 1 min to complete. When silent installation is complete, the system will automatically reboot.
– After the system has booted, you can refer to section 0 to check the driver version.
Manual Installation via INF File:
– Copy and unzip the Intel Serial IO Driver onto the Platform under test.
– Locate the INF files. (iaLPSS_GPIO.inf, iaLPSS_I2C.inf, iaLPSS_SPI.inf, iaLPSS_UART2.inf)
– Right click on the INF file and select ‘Install’ option from the menu to start the installation and then click on ‘Yes’ button in pop-up window.
– After the installation of all the drivers, reboot the system.
Download