Arturia KeyLab 61 Keyboard Controller Firmware 1.33 per Mac OS
Tipo di file: Firmware.
Sistema Operativo: Mac.
Nome del file: KeyLab_61_Firmware_1_33_mac.zip.
Bit: 32/64 Bit.
Licenza: Gratis.
Descrizione
Release notes:
New Features
– Pad backlighting can be activated using MIDI note messages on channel 10 (if you play back a track recorded using pads, with KeyLab as MIDI destination, pad’s LEDs show what have been played).
– Compatible with future Analog Lab upgrade (allowing better integration)
Bug Fixes (since 1.16)
– Proper handling of Bank 1/Bank 2 (several fixes).
– Fader may erroneously send two messages on separate MIDI channel for each move (fixed)
– Settings done using MIDI Control Center could affect another control than the one edited ( fixed)
– No messages sent by knob when set in RPN/NRPN mode and control number MSB is equal to control number LSB (fixed).
Known Problems
– Regarding pad backlighting feature, if several note messages are sent close together, some of them may be ignored (and the corresponding pad won’t light up).
KeyLab firmware Update:
– Download the Latest Firmware
– Plug the KeyLab
– Launch the Midi Control Center
– Wait until the keyboard has been recognized by the Computer. The MCC will prompt the Version of the Firmware or the message :
“Keyboard Problem
The keyboard has not been detected”
– Click on Upgrade Firmware button
– Follow the instruction of the reboot alert.
– Next Step:
Unplug the KeyLab
Hold the “Sound”, “Multi”, “Edit” key
Plug the KeyLab
Wait during 5 seconds.
The “Update” Message is showing onto the Screen
– Click “OK” on the “reboot alert”, and choose the Firmware file
– Progress bar…
– Confirmation message (Click ‘OK’)
– Close the Midi Control Center.
– Reset to default
Press both octave buttons
Power up the keyboard
Download