ZyXEL NWA5121-NI Access Point Firmware 5.00(AAID.3)C0
Type de fichier: Firmware.
Système d’exploitation: AnyOS.
Nom de fichier: NWA5121-NI_5.00(AAID.3)C0.zip.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
Following new features are introduced in this release:
– New AP WAC5302D-S support
– New AP NWA1123-ACv2 support
– Dashboard enhancement for Top N AP by 2.4G or 5G traffic usage
– Monitor Wireless enhancement for SSID Info with 2.4G/5G Station No.
– MAC Authentication fallback to Web Authentication
– Support 802.11r Fast Roaming on NWA5120 series & WAC6000 series
– Dynamic VLAN Assignment by Group
– Managed AP auto save last configuration
– Authentication Primary/Secondary Server fallback
– NXC Internal Captive Portal with FQDN support
– Support computer authentication on Microsoft AD server
– Support Japanese language on controller
– Standalone AP supports Rate Limit
– SNMP MIB Enhancement
– Log enhancement for DFS channel log
Resolved Issues:
1. [eITS: 160400957 ]
[Symptom] Badlock vulnerability on NXC controller, though in normal enterprise switched network environment, it is difficult for an attacker to perform MITM in-between NXC controller and the AD server.
2. [eITS: 160500535 ]
[Symptom] AP and NXC connect through CAPWAP, but can not automatically join default group. The AP group field of the AP is empty
3. [eITS: 160500753 ]
[Symptom] WAC6503DS AP auto reboot randomly.
4. [eITS: 160501889 ]
[Symptom] ”realm” and ”NetBIOS” support underscore(_)
5. [eITS: 160700570 ]
[Symptom] When user use 802.1x auth, the system log didn’t use prime symbol (‘ ’) to include user name.
6. [eITS: 160601343 ]
[Symptom] WAC6502D-S is frequently down.
7. [eITS: 160700869 ]
[Symptom] DHCP reservation from DHCP table in Dashboard does not work after upgrading to firmware 4.30. 8. [eITS: 160700992 ] [Symptom] The uplink rate limit setting is invalid when the SSID in tunnel mode with VLAN tag.
9. [eITS: 160800194 ]
[Symptom] When AP is changed the IP, but the tunnel rule is still used the original IP address, it cannot be re-created, caused by the connection is lost and the client cannot get the IP address.
10. [eITS: 160800370 ]
[Symptom] The uplink of Rate Limit in tunnel mode doesn’t work when the management VLAN and SSID VLAN are different.
11. [eITS: 160800371 ]
[Symptom] A laptop sent some unknown packet cause by the Zylog daemon service is dead. 12. [eITS: 160700399 ] [Symptom] Captive portal and Redirect on AP doesn’t work on repeater AP with ZyMESH .
13. [eITS: 160800401 ]
[Symptom] Wireless bridge will be disabled after rebooting.
14. [eITS: 160700868 ]
[Symptom] Add a new feature for NXC drop ICMP unreachable packets in the output chain.
15. [eITS: 160800931 ]
[Symptom] Static route cannot enter IP-0.0.0.0 in the Destination IP on the GUI, but can add via CLI.
16. [eITS: 160800931 ]
[Symptom] LDAP user login fails when upgrading to firmware v4.30
17. [eITS: 160900068 ]
[Symptom] NXC ZySH daemon dead Condition:Socket leak is caused by using debug remoteWTP command
18. [eITS: 160900555 ]
[Symptom] If connecting the devices to the NXC5500, after NXC reboot, the port speed status will be 100M. However, if unplug and re-plug again, the port speed will return to 1000M. 19. [eITS: 160900206 ] [Symptom] When we do 802.1x for authentication, the account is not able to pass the authentication.
20. [eITS: 161100309 ]
[Symptom] NXC controller QRUser fails to pass authentication if its password length is more than 60 characters.
21. [eITS: 160801219 ]
[Symptom] [MIS field trial] uamd daemon is dead caused by NXC trigger hardware watchdog to reboot the NXC
The following is the firmware upgrade procedure:
1. If user did not backup the configuration file before firmware upgrade, please follow the procedures below:
– Use Browser to login into device as administrator.
– Click Maintenance > Configuration File > Backup to save the current configuration file (config.cfg) of your system to your computer.
– Find firmware in a file that (usually) uses the system model name with the .bin extension”
– Click Maintenance > Firmware Upgrade to open the Firmware Package screen. Browser to the location of firmware package and then click Upload. The device automatically reboots after a successful upload.
– After several minutes, the system is successfully upgraded to newest version.
Télécharger