Timecode Systems Camera Adapter USB Firmware Updater 4.4
Type de fichier: Firmware.
Système d’exploitation: Windows 10, Windows 7, Windows 8, Windows 8.1.
Nom de fichier: Setup1.msi.
Bit: 64 Bit.
Licence: Gratuit.
Description
Follow these simple steps to add the latest firmware to your Timecode Systems products on a Windows system. If you have not previously installed the PC updater software application then please follow The Instructions. If you have previously installed a Timecode Systems PC updater software application then please uninstall this earlier version before following The Instructions.
SyncBac PRO
– The latest firmware version is: 1.21
– The latest FPGA version is: 1.06
: pulse
– The latest firmware version is: 4.04
– The latest FPGA version is: 1.11
– The latest app version is: 2.02
– V4.04 Changes: Added support for SyncBac PRO and advancements to BLINK protocol including introduction of a new BLINK Master ID
: wave
– The latest firmware version is: 4.04
– The latest FPGA version is: 1.11
– The latest app version is: 2.02
– V4.04 Changes: Added support for SyncBac PRO and advancements to BLINK protocol including introduction of a new BLINK Master ID
Mini trx+
– The latest firmware version is: 4.04
– The latest FPGA version is: 1.15
– V4.04 Changes: Added support for SyncBac PRO and advancements to BLINK protocol including introduction of a new BLINK Master ID
Denecke TS-TCB
– The latest firmware version is: 4.04
– The latest FPGA version is: 1.11
– V4.04 Changes: Added support for SyncBac PRO and advancements to BLINK protocol including introduction of a new BLINK Master ID
Mini trx
– The latest firmware version is: 1.21
– The latest FPGA version is: 1.11
Mini rx
– The latest firmware version is: 1.21
– The latest FPGA version is: 1.11
Mini tx
– The latest firmware version is: 5.03
– The latest version of Firmware is required.
wifimaster
– The latest firmware version is: 5.30
– The latest FPGA version is: 1.30
Instructions:
– Download the updater software package for the: pulse, SyncBac PRO,: wave, mini trx+, mini trx and mini rx.
– Choose run for the download when prompted.
– If notified of any security risks, choose Actions and select ‘Run anyway‘ (Ignore any download security warnings).
– Accept terms of the License Agreement, click ‘Yes‘.
– Wait for all Windows components to install. This is a short process, once it is complete you are ready to proceed.
– Before you open the Updater application, please ensure your device is connected to the internet. This will allow the updater app to collect the most up to date version of the Firmware, FPGA and Web view files, before you progress to update your units.
– Connect your unit to your computer via a USB cable
– Upon launch, the Updater app will automatically update your unit to the latest version
Télécharger