Parrot SkyController Firmware 1.4.6
Type de fichier: Firmware.
Système d’exploitation: AnyOS.
Nom de fichier: nap_update.plf.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
Improvements
– [General] Name of SkyController now appears in the Sliding Menu
– [General] Radar feature improvements
– [General] Skycontroller’s calibration improvements
Fixed issues
– [General] PUD upload bug fix
– [General] Configuration of the joystick OK/Settings through SkyController is now blocked to prevent a bad skycontroller mapping (configuration of this joystick is still available with a device)
– [General] Joysticks configuration is now automatically updated on both the SkyController and the device
– [General] Bugs fixes
New features
– [General] Reset of SkyController Mapping added to the Reset Wifi Procedure: press emergency button + REC button during 5s
– This procedure allows user to reset the default SkyController Mapping
< ! > Do not execute this procedure in flight, the drone risks to execute emergency procedure
Software Update Process:
– Connect your USB flash drive to a computer.
Make sure that your USB flash drive is formatted to FAT32 and not NTFS and that it has no other plf file. The procedure to format a USB flash drive to FAT32 depends on your operating system. Usually, you have to right-click on your USB flash drive.
– Download the update file.
The .plf file is the update file you have to install on your Parrot Skycontroller.
– Move the update file to the root of your USB Flash drive. Do not place the update file in any directory. Do not rename the file.
– Turn off the Parrot Skycontroller.
Connect the Parrot Skycontroller to a screen using a HDMI cable. This step is optional but it will allow you to view the update file installation status.
– Connect the USB flash drive to the Parrot Skycontroller.
– Turn on the Parrot Skycontroller.
> The update file installation starts automatically.
– Wait until the Parrot Skycontroller reboots.
Télécharger