Panasonic AK-UCU600 Camera Control Unit Firmware 01.27
Type de fichier: Firmware.
Système d’exploitation: AnyOS.
Nom de fichier: DV91000242G.zip.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
The following functions are added. (Items are added to the related menus.) AK-NP600 is required to be installed when updating the firmware.
Changements:
– Supports the protocol command for reading a MAC Address.
Supports the following INPUT/OUTPUT on MoIP.
– Camera Output: Already activated
– RET Input: Already activated
– Audio Input: Already activated
– HD TRUNK Output: New
– HD PROMPTER IN: New
– INTERCOM: New
– PGM Input: New
– TALLY: New
Versions:
– VERSION 0F.94-000-01.00
– SOFTWARE 01.27-
– NETWORK 01.02-
– UHD FPGA 01.08-
– HS FPGA 01.08-
– RETURN FPGA 1 03.29-
– RETURN FPGA 2 03.13-
– MAIN FPGA 01.16-
– ICOM FPGA 03.01-00-01.00
– USC FPGA 01.08-
Méthode d’affichage de la version:
– Each software version can be confirmed at item “VERSION” in MAINTENANCE menu.
– Connect the picture monitor to [8/PM] of HD/SD SDI OUT connector.
– Hold down the MENU button. The TOP menu screen of CCU menu appears and the MENU button lights.
– Select “MAINTENANCE” and press the SELECT dial button to open the MAINTENANCE menu screen.
– Select “VERSION” and pressing the SELECT dial button, VERSION screen is displayed.
– Each software version is displayed on the VERSION screen.
Update procedure:
– Téléchargez et décompressez l’archive.
– Copy the “PRIVATE” folder onto a formatted SD memory card
– Connect the picture monitor TV to [8/PM] of HD/SD SDI OUT connector.
– Insert an SD memory card into the SD memory card slot.
– Hold down the MENU button. The TOP menu screen of CCU menu appears and the MENU button lights.
– Select “MAINTENANCE” and press the SELECT dial button to open the MAINTENANCE menu screen.
– Select item “SD CARD” and press the SELECT dial button to open the SD CARD menu screen
– Select the item “UPDATE” and set “YES?”(Character is blink).
– Press the SELECT dial button, the update program is started.
– The software update may take approx. 40 minutes. Do not power down while updating
– When the update is completed, the message “UPDATE COMPLETE” is displayed and CCU will be automatically rebooted
Télécharger