Nikon Z 7 Camera Firmware 3.00 pour macOS
Type de fichier: Firmware.
Système d’exploitation: Mac.
Nom de fichier: F-Z7-V300M.dmg.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
Changements:
– Added support for ProGrade and Lexar CFexpress memory cards (Type B). For more information, see the Nikon website for your country or region.
– Custom Setting a4 (Auto-area AF face/eye detection) now offers an Animal detection option that adds dogs and cats to the subjects supported by face- and eye-detection autofocus. As a result, the camera can now detect and focus on the faces and eyes of dogs and cats. Animal face detection (but not eye detection) is also available in movie mode.
– Custom Setting f2 (Custom control assignment) in Group f (Controls) of the CUSTOM SETTING MENU now offers a Lens Fn2 button option, which can be used to choose the role played by the L-Fn2 button available on certain Z mount lenses (as of February 12, 2020, only the NIKKOR Z 70–200mm f/2.8 VR S).
– Added support for the focus limit switch available on certain Z mount lenses (as of February 12, 2020, only the NIKKOR Z 70–200mm f/2.8 VR S).
– Optimized the responsiveness of the switch to manual focus when the focus or control ring on a Z mount lens is rotated during autofocus. Note that the control ring only functions in this capacity when assigned the Focus (M/A) role.
Improved the functionality of subject-tracking AF (available when Auto-area AF is selected for AF-area mode) as follows:
– Subject-tracking AF can now be initiated via the Fn1 or Fn2 button on the camera or the Fn1 or Fn2 button on the lens. Subject-tracking AF must first be assigned to the control using Custom Setting f2 (Custom control assignment) in Group f (Controls) of the CUSTOM SETTING MENU or Custom Setting g2 (Custom control assignment).
– The behavior of the camera when tracking is end by pressing the AF-ON button or by pressing the shutter-release button halfway with AF-C (continuous-servo autofocus) and subject-tracking AF enabled in photo mode has been changed to more closely resemble that of the 3D-tracking option for digital SLR cameras.
Correction des problèmes suivants:
– When Viewfinder brightness was adjusted manually, brightness would sometimes change when the standby timer was restarted.
– iOS devices running iOS 13 would sometimes display a Bluetooth pairing request when pairing was complete.
– Horizontal lines would sometimes appear in photographs.
Remarque:
– For information on the license for the open-source software included in the camera’s NVM Express driver, see “BSD License (NVM Express Driver)”.
Affichage de la version du micrologiciel de l’appareil photo:
– Allumez l’appareil photo.
– Appuyez sur le bouton MENU de l’appareil photo et sélectionnez Version du firmware dans le menu SETUP pour afficher la version du firmware de l’appareil photo.
– Vérifiez la version du firmware de l’appareil photo.
– Mettez l’appareil photo hors tension.
Mise à jour du micrologiciel de l’appareil photo:
– Créez un dossier sur le disque dur de l’ordinateur et nommez-le comme vous le souhaitez.
– Download the file to the folder newly-created.
– Extract the file to a folder named “Z7Update”
– Using a card slot or card reader, copy the .bin to a memory card that has been formatted in the camera.
– Note: Be sure to copy the firmware to the root (top-most) directory of the memory card. The camera will not recognize the new firmware if it is placed in a folder under the root directory.
– Insert the memory card into the camera and turn the camera on.
– Sélectionnez la version du firmware dans le menu Configuration et suivez les instructions à l’écran pour terminer la mise à jour du firmware.
– Une fois la mise à jour terminée, éteignez l’appareil photo et retirez la carte mémoire.
– Confirmez que le firmware a été mis à jour vers la nouvelle version.
Télécharger