Nikon D6 Camera Firmware 1.10 pour macOS
Type de fichier: Firmware.
Système d’exploitation: Mac.
Nom de fichier: F-D6-V110M.dmg.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
Changements:
– Users can now choose the band (2.4 or 5 GHz) for the host SSID when connecting to wireless networks via a WT-6 wireless transmitter attached to the camera. The band is listed in Connection Wizard network-selection dialog and post-connection in the Wired LAN/WT display.
– Autofocus for viewfinder photography has been improved.
– Focus-point selection now works smoothly even if the user abruptly switches directions on the multi selector or sub-selector.
Correction des problèmes suivants:
– Autofocus sometimes produced unpredictable results when used with certain AF-S lenses with maximum apertures faster than f/2.8.
– Instead of flashing, the network indicator would remain lit when an Ethernet connection was established.
– The WT-6 wireless transmitter could not be used to join wireless networks with SSIDs containing a space, semicolon (“;”), ampersand (“&”), or backslash (“”).
– The over- and under-exposure indicators in the viewfinder were reversed when +0- was selected for Custom Setting f9 (Reverse indicators) in the CUSTOM SETTING MENU.
– The exposure indicators were slow to refresh when shutter speed, aperture, or ISO sensitivity were adjusted using the main- or sub-command dial.
– If, when Focus point and AF-area mode was selected for Custom Setting a5 (Store points by orientation) in the CUSTOM SETTING MENU, the standby timer expired with the camera in portrait (tall) orientation and the camera was then rotated to landscape (wide) orientation before the standby timer was reactivated, the camera would not restore the AF-area mode previously selected for landscape orientation, but would instead switch to the AF-area mode selected when the camera was in portrait orientation.
– The following would not be immediately updated to reflect the true number of exposures remaining after pictures were deleted: the number of exposures remaining shown in the top control panel when the camera was off, and the frame-count display in the rear control panel when Frame count was selected for Custom Setting d12 (Rear control panel) in the CUSTOM SETTING MENU.
– The AF fine-tuning options item could be used to store only one set of fine-tuning values for AF-S NIKKOR 180-400mm f/4E TC1.4 FL ED VR lenses: users could store either values for use with the built-in teleconverter or values for use without, but not both.
Affichage de la version du micrologiciel de l’appareil photo:
– Allumez l’appareil photo.
– Appuyez sur le bouton MENU de l’appareil photo et sélectionnez Version du firmware dans le menu SETUP pour afficher la version du firmware de l’appareil photo.
– Vérifiez la version du firmware de l’appareil photo.
– Mettez l’appareil photo hors tension.
Mise à jour du micrologiciel de l’appareil photo:
– Créez un dossier sur le disque dur de l’ordinateur et nommez-le comme vous le souhaitez.
– Enregistrez le fichier téléchargeable dans le nouveau dossier créé.
– Run the package to extract a .bin file (the camera firmware) to a folder named “D6Update”
– Utilisez un emplacement de carte ou un lecteur de carte pour copier le fichier .bin dans une carte mémoire qui a été formatée dans l’appareil photo.
– Insérez la carte mémoire dans l’emplacement 1 de l’appareil photo et allumez-le.
– Sélectionnez la version du firmware dans le menu Configuration et suivez les instructions à l’écran pour terminer la mise à jour du firmware.
– Une fois la mise à jour terminée, éteignez l’appareil photo et retirez la carte mémoire.
– Confirmez que le firmware a été mis à jour vers la nouvelle version.
Télécharger