NETGEAR JGS516PE Switch Firmware 2.6.0.43
Type de fichier: Firmware.
Système d’exploitation: AnyOS.
Nom de fichier: JGS516PE_GS116Ev2_V2.6.0.43.zip.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
New Features & Enhancements:
– For enhanced security, the default “password” must be changed when you log in to the switch for the first time.
– Changes the Switch Management Mode (System > Management > Switch Management Mode) default value from Web browser and Plus Utility to Web browser only.
Security Corrections:
– PSV-2019-0194
Bug Corrections:
– Addresses performance issue found in certain situations on firmware version 2.6.0.21 to 2.6.0.35.
ATTENTION:
– After JGS516PE and GS116Ev2 are upgraded to FW version V2.6.0.21 or higher, it cannot work with Plus Utility version prior to V2.7.2.
– Do not interrupt the network connection or power to the switch, or refresh or close the browser window during this process. Do not disconnect any Ethernet cables or power off the switch until the process is complete.
Upgrade Procedure:
– Download the new firmware and store it in local PC.
– Unzip it to get the switch firmware image (.bin format).
– Go to GUI page “Maintenance > Firmware Upgrade”
– Click the Browse button and locate and select the new firmware image file.
– Click the Apply button.
– When the upgrade is complete, your switch restarts. The upgrade process typically takes about three minutes.
Télécharger