NETGEAR GS728TXP Switch Firmware 6.6.4.21
Type de fichier: Firmware.
Système d’exploitation: AnyOS.
Nom de fichier: GS728TX_GS728TXP_GS752TX_GS752TXP_V6.6.4.21.zip.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
New Features and Enhancements:
– Default password must be changed when you log in to the switch for the first time.
– To configure SNMPv3, the authentication protocol must be configured as MD5 or SHA. The None option for the authentication protocol is no longer allowed.
– Changed the default setting of the Smart Control Center (SCC) management from enabled to disabled. Note: The SCC Utility can still discover the switch.
Bug Corrections:
– Unable to set the end time of the PoE timer to mid-night (00:00).
– Cannot use SNMP MIB to disable or enable PoE power per port.
– There is no rejection or warning when adding a new ACL rule beyond the maximum number of rules that the system can handle. The new rule disappears after a system reboot.
Known Issues:
– SFP+ model AXM765 cannot be used as 10G stacking. [Workaround]: Use other SFP+ models AXM761, AXM762, AXM763 or DAC cable AXC761/AXC763 instead.
– RPS/AC hot swap sometimes (quickly unplug/plug) does not take effect after plug back APS1000W power cord. [Workaround]: re-plug the APS1000W power cord slowly.
– Console hang happens in S3300 device, if we press the reset button repeatedly during reload. [Workaround]: Power cycle the switch. Customer needs to be cautious not to press reset button multiple times during boot stage.
Notes:
– The released zip contains switch firmware (.stk) and MIB files. Unzip the file to extract the switch image for firmware upgrade.
– Téléchargez le firmware to both an active and inactive (backup) images when upgrading from v6.4.0.x firmware.
– Clear the browser’s cache to login the switch via the web GUI after updating the firmware.
Firmware Update Instructions:
1. In the GUI select Maintenance > Download > HTTP File Download.
2. Set the File Type as Archive or Software.
3. Set the Image Name as image1.
4. Select the firmware file that’s stored in your local computer via the Browse button, then click the Apply button to start firmware downloading. The download takes several minutes. Do not power cycle the switch before. The success message shows up.
5. Repeat Steps 2-4. Set the Image Name to image2 and repeat Steps 3 and 4 to download the switch firmware to image2
6. Select Maintenance > File Management > Dual Image > Dual Image Status to double check that the current version is correctly downloaded to both image1 and image2.
7. If not, go back to Steps 3 and 4 to download the switch image again.
8. Select Maintenance > Reset > Device Reboot.
9. Set the Reboot Unit No. as All (default option); select the checkbox, and then click the Apply button.
10. After the switch restarts, double check whether the firmware is updated correctly: a. Log in the switch. b. Select GUI page System > Management > System Information. Log in the switch, select GUI page System > Management > System Information
Télécharger