NETGEAR GS510TP Switch Firmware 5.4.2.27
Type de fichier: Firmware.
Système d’exploitation: AnyOS.
Nom de fichier: GS510TP_v5.4.2.27.zip.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
Bug Corrections:
– Fixes the issue where the switch web GUI cannot be accessed after 802.1X port authentication (Security > Port Authentication >Advanced > 802.1X Configuration) is enabled.
– Addresses the following security vulnerability issues published on CVE web site: CVE-2013-4775 and CVE-2016-7941
Known Issues:
– Port PVID (Switching > VLAN > Advanced > Port PVID Configuration) does not automatically change back to 1 after its associated VLAN is deleted.
– Workaround: Manually change the PVID back to 1.
Limitations:
– Combined MAC and IP ACL does not work with double VLAN tagged traffic.
Upgrading via the SCC 1.0 Tool
– Discover the Switch (GS108T/GS110TP) based on 5.0.1.x to be upgraded by clicking the “Discover” button on the SCC 1.0 Tool
– Select the Device to be upgraded
– Click the Maintenance and then the “Firmware” link to select the desired device to be upgraded
– Browse the 5.0.2.x image to be downloaded on the switch
– Select the Primary or the Secondary storage. Make sure to check the “Run this FW after download”
– Enter the Password to login
– Click the “Apply” button
– The switch reboots automatically and upgrades to the 5.0.2.x downloaded image after automatically upgrading the Boot code
– Install the new SCC 1.1 tool. This tool is required to manage the switches running 5.0.2.x firmware.
Upgrading via the TFTP:
Using Smartwizard
– Discover the Switch (GS108T/GS110TP) based on 5.0.1.x to be upgraded by clicking the “Discover” button on the SCC 1.0 Tool
– Select the Device to be upgraded
– Click the “Web Browser access” button to open the Web browser access to the Switch
Direct access
– Access the switch management interface using web browser
Then follow the following steps
– Enter the Password to login
– Click “Maintenance” Tab, “Download” selection and then the “TFTP File Download” link
– Select the Image (Image1 or Image2) to be upgraded, enter the IP address of the
– TFTP Server and File name to point to the 5.0.2.x image to be upgraded
– Check the “Start File Transfer” option
– Click the “Apply” button and wait for the download to complete.
– Click the “File Management” tool bar and “Dual image status” to ensure that the selected image in the above Step is selected as the next-active image. If not, select the correct image by selecting the “Dual image configuration” link.
– Click the “Reset” toolbar, “Device Reboot” Check box and then the “Apply” button to reboot the switch to the upgraded image.
– The switch reboots and upgrades to the 5.0.2.x downloaded image after automatically upgrading the Boot code
– Install the new SCC 1.1 tool. This tool is required to manage the switches running 5.0.2.x firmware.
Upgrading via the HTTP
Using Smartwizard
– Discover the Switch (GS108T/GS110TP) based on 5.0.1.x to be upgraded by clicking the “Discover” button on the SCC 1.0 Tool
– Select the Device to be upgraded
– Click the “Web Browser access” button to open the Web browser access to the Switch
Direct access
– Access the switch management interface using web browser
Then follow the following steps
– Enter the Password to login
– Click “Maintenance” Tab, “Download” selection and then the “HTTP File Download” link
– Select the Image (Image1 or Image2) to be upgraded
– Browse to the 5.0.2.x image location on the PC to be upgraded
– Click the “Apply” button and wait for the download to complete.
– Click the “File Management” and “Dual image status” to ensure that the selected image in the above Step 6 is selected as the next-active image. If not, select the correct image by selecting the “Dual image configuration” link.
– Click the Reset, “Device Reboot” Check box and then the “Apply” button to reboot the switch to the upgraded image.
– The switch reboots and upgrades to the 5.0.2.x downloaded image after automatically upgrading the Boot code
– Install the new SCC 1.1 tool. This tool is required to manage the switches running 5.0.2.x firmware.
Télécharger