MikroTik RouterOS TILE Firmware 6.46 RC 9
Type de fichier: Firmware.
Système d’exploitation: AnyOS.
Nom de fichier: all_packages-tile-6.46beta9.zip.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
Changements dans cette version:
– bonding – fixed bonding running status after reboot when using other bonds as slave interfaces (introduced in v6.45);
– bonding – properly handle MAC addresses when bonding WLAN interfaces;
– dhcpv6-server – include « User-Name » parameter in accounting requests;
– ipsec – added « connection-mark » parameter for mode-config initiator;
– ipsec – allow peer argument only for « encrypt » policies (introduced in v6.45);
– ipsec – fixed peer configuration migration from versions older than v6.43 (introduced in v6.45);
– ipsec – show warning for policies with « unknown » peer;
– ospf – fixed possible busy loop condition when accessing OSPF LSAs;
– ppp – disable DTR send when using at-chat;
– ssh – do not enable « none-crypto » if « strong-crypto » is enabled on upgrade (introduced in v6.45);
– ssh – fixed executed command output printing (introduced in v6.45);
– supout – fixed supout file generation outside of internal storage with insufficient space;
– upgrade – fixed « auto-upgrade » to use new style authentication (introduced in v6.45);
– usb – general USB modem stability improvements;
– userman – updated Authorize.Net to use SHA512 hashing;
– vlan – fixed « slave » flag for non-running interfaces (introduced in v6.45);
– winbox – properly show timestamp in file « Creation Time » field;
Other changes since v6.45.1:
– cloud – properly stop « time-zone-autodetect » after disable;
– conntrack – properly start manually enabled connection tracking;
– dhcpv6-server – made « calling-station-id » contain MAC address if DUID contains it;
– fetch – improved stability when processing large output data;
– hotspot – fixed non-local NAT redirection to port TCP/64873;
– ipsec – improved stability for peer initialization (introduced in v6.45);
– lte – do not allow setting 3G and GSM modes on LTE only modems;
– lte – show « primary-band » only for LTE modems;
– radius – fixed « User-Password » encoding (introduced in v6.45);
– tr069-client – reconnect to ACS when « ConnectionRequestURL » is updated;
– w60g – added « region » setting to limit allowed frequencies (CLI only);
Télécharger