MikroTik RouterOS ARM Firmware 6.45 RC 42
Type de fichier: Firmware.
Système d’exploitation: AnyOS.
Nom de fichier: all_packages-arm-6.45beta42.zip.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
MAJOR CHANGES IN v6.45:
– dot1x – added support for IEEE 802.1X Port-Based Network Access Control (CLI only);
– ike2 – added support for EAP authentication methods (eap-tls, eap-ttls, eap-peap) as initiator (CLI only);
Changements dans cette version:
– dot1x – added support for IEEE 802.1X Port-Based Network Access Control (CLI only);
– capsman – fixed interface-list usage in access list;
– cloud – added « replace » parameter for backup « upload-file » command;
– crs3xx – correctly handle switch reset (introduced in v6.45beta31);
– defconf – added « custom-script » field that prints custom configuration installed by Netinstall;
– defconf – automatically set « installation » parameter for outdoor devices;
– dhcp – create dual stack queue based on limitations specified on DHCPv4 server lease configuration;
– dhcpv4-server – added RADIUS accounting support with queue based statistics;
– dhcpv6-server – added « insert-queue-before » and « parent-queue » parameters (CLI only);
– discovery – correctly create neighbors from VLAN tagged discovery messages;
– discovery – show neighbors on actual mesh ports;
– ethernet – increased loop warning threshold to 5 packets per second;
– gps – make sure « direction » parameter is upper case;
– gps – strip unnecessary trailing characters from « longtitude » and « latitude » values;
– hotspot – moved « title » HTML tag after « meta » tags;
– ipsec – added support for RADIUS accounting for « eap-radius » and « pre-shared-key-xauth » authentication methods (CLI only);
– rb921 – improved system stability (« /system routerboard upgrade » required);
– ssh – accept remote forwarding requests with empty hostnames;
– ssh – improved remote forwarding handling (introduced in v6.44.3);
– tr069-client – improved error reporting with incorrect firware upgrade XML file;
– w60g – do not show unused « dmg » parameter;
– w60g – show running frequency under « monitor » command;
– winbox – show « LCD » menu only on boards that have LCD screen;
– wireless – fixed frequency duplication in the frequency selection menu;
– wireless – improved 160MHz channel width stability on rb4011;
– wireless – improved installation mode selection for wireless outdoor equipment;
– wireless – set default SSID and supplicant-identity the same as router’s identity;
– wireless – updated « china » regulatory domain information;
Other changes since v6.44.3:
– bridge – correctly add interface list as bridge port (introduced in v6.45beta34);
– bridge – fixed log message when hardware offloading is being enabled;
– certificate – added « key-type » field (CLI only);
– certificate – added support for ECDSA certificates (prime256v1, secp384r1, secp521r1) (CLI only);
– certificate – made RAM the default CRL storage location;
– certificate – removed DSA (D) flag;
– crs3xx – correctly display auto-negotiation information for SFP/SFP+ interfaces in 1Gbps rate;
– crs3xx – correctly handle switch reset (introduced in v6.45beta34);
– crs3xx – fixed auto negotiation when 2-pair twisted cable is used (downshift feature);
– dhcp – create dual stack queue based on limitations specified on DHCPv4 server lease configuration;
– dhcp – do not require lease and binding to have the same configuration for dual-stack queues;
– dhcp – show warning in log if lease and binding dual-stack related parameters do not match and create separate queues;
– dhcpv4-server – added « client-mac-limit » parameter (CLI only);
– dhcpv4-server – added « vendor-class-id » matcher (CLI only);
– dhcpv4-server – improved stability when performing « check-status » command;
– dhcpv4-server – replaced « busy » lease status with « conflict » and « declined »;
– dhcpv6-client – fixed status update when leaving « bound » state;
– dhcpv6-server – added « address-list » support for bindings (CLI only);
– dhcpv6-server – added « insert-queue-before » and « parent-queue » parameters (CLI only);
– dhcpv6-server – added RADIUS accounting support;
– dhcpv6-server – added « route-distance » parameter (CLI only);
– dhcpv6-server – override prefix pool and/or DNS server settings by values received from RADIUS;
– discovery – improved neighbour’s MAC address detection;
– discovery – limit max neighbour count per interface based on total RAM memory;
– e-mail – include « message-id » identification field in e-mail header;
– ethernet – added support for 25Gbps and 40Gbps rates;
– export – fixed SMS « allowed-number » compact export (introduced in v6.45beta);
– fetch – added SFTP support;
– fetch – improved user policy lookup;
– ike1 – adjusted debug packet logging topics;
– ike1 – fixed rekeying process when NAT is detected (introduced in v6.45beta16);
– ike2 – added support for ECDSA certificate authentication (rfc4754);
– ike2 – do not send « User-Name » attribute to RADIUS server if not provided;
– ike2 – fixed first child SA generation (introduced in v6.45beta34);
– ike2 – improved XAuth identity conversion on upgrade;
– ike2 – prefer SAN instead of DN from certificate for ID payload;
– ipsec – added dynamic comment field for « active-peers » menu inherited from identity (CLI only);
– ipsec – added « ph2-total » counter to « active-peers » menu (CLI only);
– ipsec – added support for RADIUS accounting for « eap-radius » and « pre-shared-key-xauth » authentication methods (CLI only);
– ipsec – added traffic statistics to « active-peers » menu (CLI only);
– ipsec – do not allow adding identity to a dynamic peer;
– ipsec – fixed policies becoming invalid after changing priority;
– ipsec – general improvements in policy handling;
– ipsec – properly drop already established tunnel when address change detected;
– ipsec – renamed « remote-peers » to « active-peers » (CLI only);
– ipsec – renamed « rsa-signature » authentication method to « digital-signature »;
– ipsec – replaced policy SA address parameters with peer setting;
– ipsec – use tunnel name for dynamic IPsec peer name;
– lte – added passthrough interface subnet selection;
– lte – added support for manual operator selection;
– lte – allow setting empty APN;
– lte – allow to specify URL for firmware upgrade « firmware-file » parameter;
– lte – do not show error message for info commands that are not supported;
– lte – fixed session reactivation on R11e-LTE in UMTS mode;
– lte – improved « info » command query;
– lte – improved R11e-4G modem operation;
– lte – renamed firmware upgrade « path » command to « firmware-file » (CLI only);
– lte – show alphanumeric value for operator info;
– lte – show correct firmware revision after firmware upgrade;
– lte – use default APN name « internet » when not provided;
– lte – use secondary DNS for DNS server configuration;
– ospf – added support for link scope opaque LSAs (Type 9) for OSPFv2;
– ospf – improved « unknown » LSA handling in OSPFv3;
– ppp – added initial support for Quectel BG96;
– proxy – increased minimal free RAM that can not be used for proxy services;
– rb4011 – fixed SFP linking (introduced in v6.45beta6);
– sfp – fixed S-35LC20D transceiver DDMI readouts after reboot;
– sms – added USSD message functionality under « /tool sms » (CLI only);
– sms – allow specifying multiple « allowed-number » values;
– sms – fixed long message parsing (introduced in v6.45beta19);
– sms – improved delivery report logging;
– snmp – added « dot1dStpPortTable » OID;
– snmp – added OID for neighbor « interface »;
– snmp – added « write-access » column to community print;
– snmp – allow setting interface « adminStatus »;
– snmp – properly return multicast and broadcast packet counters for IF-MIB OIDs;
– ssh – added new « ssh-exec » command for non-interactive command execution;
– ssh – improved session rekeying process on exchanged data size threshold;
– ssh – use correct user when « output-to-file » parameter is used;
– supout – added IPv6 ND section to supout file;
– supout – added « kid-control devices » section to supout file;
– supout – changed IPv6 pool section to output detailed print;
– switch – properly reapply settings after switch chip reset;
– tftp – added « max-block-size » parameter under TFTP « settings » menu (CLI only);
– tile – improved link fault detection on SFP+ ports;
– tr069-client – added LTE CQI and IMSI parameter support;
– tr069-client – fixed potential memory corruption;
– tunnel – removed « local-address » requirement when « ipsec-secret » is used;
– userman – added support for « Delegated-IPv6-Pool » and « DNS-Server-IPv6-Address » (CLI only);
– w60g – prefer AP with strongest signal when multiple APs with same SSID present;
– winbox – fixed crash when opening CAPsMAN menu (introduced in v6.45beta27);
– wireless – fixed 5GHz interface disappearing after upgrade (introduced in v6.45beta19);
– wireless – fixed « country-info » printing (introduced in v6.45beta27);
– wireless – fixed incorrect IP header for RADIUS accounting packet;
– wireless – improved DFS radar detection when using non-ETSI regulated country;
– wireless – updated « india » regulatory domain information;
– wireless – updated « new zealand » regulatory domain information;
Télécharger