Intel ir3 2208 ROC Hardware RAID Firmware 23.32.0-0009
Type de fichier: Firmware.
Système d’exploitation: AnyOS.
Nom de fichier: 2208sashwr_fwpkg-v23.32.0-0009.zip.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
Firmware 3.440.05-3712:
– SCGCQ00701810 – (Closed) – Update Gas Guage Safety Status register bit positions
– SCGCQ00712268 – (Closed) – Internal development defect to correct Module version validation logic for Gas Gauge firmware update
– SCGCQ00729591 – (Closed) – Preventing PatrolRead from correcting the same error LBA in loop
– SCGCQ00730691 – (Closed) – The cache policy of Virtual Drives(VDs) do not change to Write-Through(WT) if FAULT is asserted and there is no indication in BQ33100 Safety Status register.
– SCGCQ00713438 – (Closed) – FW doesn’t do an Online Firmware Update (OFU) after a successful Gas Gauge firmware update .
– SCGCQ00726689 – (Closed) – Patrol Read operation does not resume after a reboot when using the HII application.
– SCGCQ00735931 – (Closed) – Device Discovery does not complete in the case when Test Unit Read (TUR) command fails for 2 drives.
– SCGCQ00721106 – (Closed) – Foreign Import fail after controller exchange
– SCGCQ00723334 – (Closed) – FW reports a partially incorrect message in the case when 5 SuperCap learns retries fail.
– SCGCQ00735634 – (Resolved) – Drives change to “foreign” state when FW is downgraded from MR 5.11 to MR 5.6/5.7/5.8/5.9
– SCGCQ00694585 – (Closed) – MR controller stops posting with message that controller as base port not responding when you have 238 PD’s spun down.
– SCGCQ00703521 – (Closed) – When learn fails to start, FW retries 5 more times before SuperCap is reported bad
– SCGCQ00707882 – (Closed) – Performing reboot immediately after updating the Gas Gauge (before learn completes) results in the FW reporting an update error on every subsequent boot.
– SCGCQ00715168 – (Closed) – Flashing wrong Gas Gauge image (or any bad image) will force VDs to WT(Write Through) and fail and there is no path back to WB other than rebooting
– SCGCQ00726641 – (Closed) – During POST message overlaps with another line.
– SCGCQ00667469 – (Closed) – Firmware crash is seen while trying to import VDs when there is preserved pinned cache.
– SCGCQ00692169 – (Closed) – Code Review fixes for an Enhancement Request
– SCGCQ00730541 – (Closed) – Flashing wrong Gas Gauge FW will succeed if flashed after good Gas Gauge FW is flashed and before the learn starts
– SCGCQ00730700 – (Closed) – Few un-acceptable prints in serial log.
– SCGCQ00679094 – (Closed) – Change SuperCap auto learn cycle period to 27 days and 22 hours.
– SCGCQ00649843 – (Closed) – Issue a complete Gas Gauge reset on every boot
– SCGCQ00676800 – (Closed) – Implemented Gas gauge FW update functionality .
– SCGCQ00679095 – (Implemented) – Reduce the monitoring time of CL (Capacitor Learning) flag in BQ33100 Operation Status register to 5Sec when a learn command is issued.
– SCGCQ00671027 – (Closed) – When supercap learn is pending (overdue) at boot, exposure time in WB mode is seen for up to 1 minute 5 seconds.
– SCGCQ00712210 – (Port_Complete) – Preventing a specific supercap error message being printed in term log
– SCGCQ00725140 – (Port_Complete) – Extend firmware support for the new SuperCap revisions
– SCGCQ00734402 – (Port_Complete) – Few un-acceptable prints in serial log.
– SCGCQ00734409 – (Port_Complete) – Foreign Import fail after controller exchange
– SCGCQ00741846 – (Port_Complete) – Drives change to “foreign” state when FW is downgraded from MR 5.11 to MR 5.6/5.7/5.8/5.9
– SCGCQ00709619 – (Port_Complete) – Machine Check exception occurs during cache offload
– SCGCQ00712170 – (Port_Complete) – Prevent changing unconfigured drives to JBOD in MR
– SCGCQ00733106 – (Port_Complete) – During the AC cycle test via SAS2208 MR card with TMMA, it will halt on cached data was lost error
– SCGCQ00733107 – (Port_Complete) – During the AC cycle test via SAS2208 MR card with TMMA, it will halt on cached data was lost error
– SCGCQ00741723 – (Port_Complete) – Preventing PatrolRead from correcting the same error LBA in loop
– SCGCQ00741771 – (Port_Complete) – Adding a check in firmware to validate incoming configuration structure
– SCGCQ00685816 – (Port_Complete) – Potential data integrity issue after media error correction
– SCGCQ00685958 – (Port_Complete) – SSD causes system to hang at POST
– SCGCQ00688176 – (Port_Not_Required) – Preventing controller reset after running several hours with ASPM(Active State Power Management) enabled
– SCGCQ00688177 – (Port_Complete) – Preventing VD read related cache setting changes when enabling write cache setting from OS
– SCGCQ00725141 – (Port_Complete) – Extend firmware support for the new SuperCap revisions
BIOS 5.48.04.0:
– SCGCQ00720411 – (Closed) – OpROM 240VD: Not able to boot to OS from the VD whose target ID is greater than 128
– SCGCQ00455591 – (Closed) – Memory access issue for Mercury when loading Ctrl R
– SCGCQ00693494 – (Closed) – setting deviceExposure greater than or eaual to 128 will show wrong VD handled by bios
– SCGCQ00455597 – (Closed) – Memory allocation: Allocate only two 64k
– SCGCQ00736737 – (Port_Complete) – xprintf display issue when FW reports percentage for device scan
– SCGCQ00709995 – (Port_Complete) – OEM wants the battery status text in BIOS to change from “missing” to “N/A” for iMR solutions.
NVDATA 2.1409.03-0137:
– Various changes for different OEMs.
UEFI_Driver 0x06090700 (SIGNED):
– SCGCQ00691044 – (Closed) – Code refactor effort: Hii Image buffer clean-up
– SCGCQ00688789 – (Closed) – DHP: Remove default value from numeric primitive that is present under suppressif
– SCGCQ00732773 – (Closed) – UEFI Driver: If the platform contains UEFI Spec Rev < than 2.3.0, then don’t HII
– SCGCQ00756810 – (Closed) – PKG 9 HII form/When you have a a critical message such as missing VDs, after select “C” <ENTER>, it will show an assert
– SCGCQ00726723 – (Closed) – Ext/SCSI PassThru: UEFI Driver not filling direction flag correctly for Read
– SCGCQ00696656 – (Closed) – Update Mbox value for 240VD Support
– SCGCQ00650086 – (Implemented) – UEFI Driver UDK2010 complaince
– SCGCQ00688987 – (Port_Complete) – Don’t let user boot to OS until user discards dirty cache
– SCGCQ00726756 – (Port_Complete) – Implement password EFI_IFR_FLAG_CALLBACK bit requirement from UEFI spec 2.4 Errata B
– SCGCQ00693159 – (Port_Complete) – Return health status failed if we have returned device error from Start()
– SCGCQ00726831 – (Port_Complete) – Safe guard: Return health status failed if platform calls GetHealthStatus w/ NULL handle after we return intermediate status
– SCGCQ00736761 – (Port_Complete) – Return health status failed if we have returned device error from Start()
– SCGCQ00756861 – (Port_Complete) – ControllerInfo[CtrlIndex].ControllerHandle got initialized incorrectly or too early
– SCGCQ00695249 – (Port_Complete) – Safe guard: Return health status failed if platform calls GetHealthStatus w/ NULL handle after we return intermediate status
– SCGCQ00716623 – (Port_Complete) – For OEM change memory type from EfiRuntimeServicesData to EfiMemoryMappedIO
– SCGCQ00726520 – (Port_Complete) – For OEM dont free the host memory during disconnect/unload process
– SCGCQ00726727 – (Port_Complete) – Ext/SCSI PassThru: UEFI Driver not filling direction flag correctly for Read
– SCGCQ00726830 – (Port_Complete) – DHP: Remove default value from numeric primitive that is present under suppressif
– SCGCQ00688988 – (Port_Complete) – Don’t let user boot to OS until user discards dirty cache
– SCGCQ00716622 – (Port_Complete) – For OEM dont free the host memory during disconnect/unload process
– SCGCQ00725109 – (Port_Complete) – For OEM change memory type from EfiRuntimeServicesData to EfiMemoryMappedIO
– SCGCQ00726828 – (Port_Complete) – Code refactor effort: Hii Image buffer clean-up
Hii v03.10.09.00 (SIGNED):
– SCGCQ00689437 – (Closed) – Schedule consistency check gives an error message on Apply changes
– SCGCQ00692849 – (Closed) – When Controller is in Safe Mode don’t remove UCM formset
– SCGCQ00696506 – (Closed) – Grammaical errors in HII warning message during FW Flash.
– SCGCQ00691938 – (Closed) – HII: Return device error when MR_DCMD_CTRL_PROPERTIES_SET fails.
– SCGCQ00700304 – (Closed) – MR_240VD:System fails to boot into SETUP[F2] and displays blank screen with 160 and 240 VDs
– SCGCQ00716628 – (Closed) – To Handle Code collab review Defect for SCGCQ00700199
– SCGCQ00700199 – (Closed) – After selcting Discard pinned Cache from Controller Management, Form will be taken to Cache and Memory after success.
– SCGCQ00702200 – (Closed) – Firmware Update feature fails to update firmware in HII
– SCGCQ00709543 – (Closed) – gHiiDriver.ExtLDSupport should be Filled with appropriate value before it’s used
– SCGCQ00702196 – (Closed) – Asserts seen before loading HII
– SCGCQ00704309 – (Closed) – HII: Question value mismatch message seen in Enclosure Management screen.
– SCGCQ00714530 – (Closed) – HII: Firmware Update – On selecting empty folder, hang is seen.
– SCGCQ00731567 – (Closed) – use hwPresent.memory to determine iMR
– SCGCQ00706817 – (Closed) – MR_240VD: Virtual Drive properties[Read/Write/IO Policy] gets changed after VD creation from HII
– SCGCQ00710064 – (Closed) – Handline code collaborator Defect for SCGCQ00709543
– SCGCQ00716636 – (Closed) – Incomplete SAS Address
– SCGCQ00705577 – (Closed) – Unable to select the second enlcosure when multiple enclosures are connected to a controller .
– SCGCQ00723184 – (Closed) – Capacity Allocation in drive group properties is inappropriate
– SCGCQ00730496 – (Closed) – MR: HII gives the option to set -head of queue for raid 0
– SCGCQ00742103 – (Closed) – Remove Head Of Queue rebuild feature
– SCGCQ00704216 – (Closed) – HII hangs on selecting “View Drive Group Properties”
– SCGCQ00734447 – (Closed) – Patrol read prop page gives an error message on Apply changes
– SCGCQ00642228 – (Implemented) – Implement Head of Queue drive rebuild for MegaRAID controllers
– SCGCQ00650085 – (Implemented) – HEFU HII UDK2010 complaince
– SCGCQ00689070 – (Closed) – MR 6.2- Negative test HII browser- Mixing unsupported drives message needs update
– SCGCQ00664753 – (Closed) – Ability to enable/disable JBOD mode in HII & CTRL-R
– SCGCQ00656614 – (Closed) – Add ability to take a VD offline, bring back VD online
– SCGCQ00688454 – (Implemented) – HEFU HII UDK2010 complaince
– SCGCQ00695063 – (Port_Complete) – Call UninstallStoreLib when we call StopControllerHiiImpl function
– SCGCQ00695068 – (Port_Complete) – In HII Create VD option is enabled when resconstruction is in progress (on partial VD)
– SCGCQ00695072 – (Port_Complete) – H730P- Not showing PD to assign as DHS to R50/ R60 VD if PD is of lesser size than largest PD in V
– SCGCQ00695223 – (Port_Complete) – Contents of few help messages are improper
– SCGCQ00728678 – (Port_Complete) – OEM UEFI creating a new VD in a “hole” in the drive group free space, hangs when viewing drive group properties
– SCGCQ00756855 – (Port_Complete) – Chk the err status for HL_Get_PD_List() and HL_Get_PD_Info in UF002_PrepareData() + check Driver handle if index is valid
Other Versions:
– WebBIOS 6.1-71-e_71-Rel
– ROMENV 1.08
– PCLI 05.07.00
– BootBlock 2.05.00.00-0010
– BootBlockCommon 07.26.26.219
– FCODE 4.16.08.00
This download is valid for the product(s) listed below.
– Intel Integrated RAID Module RMS25CB040
– Intel Integrated RAID Module RMS25CB080
– Intel Integrated RAID Module RMS25PB040
– Intel Integrated RAID Module RMS25PB080
– Intel Integrated RAID Module RMT3CB080
– Intel Integrated RAID Module RMT3PB080
– Intel RAID Controller RS25AB080
– Intel RAID Controller RS25DB080
– Intel RAID Controller RS25NB008
– Intel RAID Controller RS25SB008
Télécharger