Hasselblad H4D-50 Multi-Shot Digital Back Firmware R370
Type de fichier: Firmware.
Système d’exploitation: AnyOS.
Nom de fichier: firmware_R370.cim.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
This package contains firmware version R370 for H4D-40, H4D-50, H4D-50MS, H3DII-50, H3DII-50MS, H4D-200MS & CFV50.
New features:
– H4D-40: Possible to select lower preview resolution to get a higher number of captures per minute.
– Prise en charge de UDMA7 CF cards (up to 128 GB)
– Solves a possible problem with a faint magenta cast on long exposures with CFV-50
– Improved stability in the Multi-shot sequence
Étapes d’installation:
1. Décompressez le fichier téléchargé.
2. Make sure your camera is turned on.
3. Connect your complete camera, including the capture unit, lens and viewfinder to Phocus. 4. Go to “File” and then “Update Firmware” and locate the desired firmware package (firmware_R370.cim) on your computer, and click “Update”.
5. Follow the instructions provided from the software carefully! Do not switch off the camera during the update process, unless specifically requested by the Phocus software.
6. When the update has been finalized, please restart your camera and check that the firmware has been successfully updated.
Avis important:
– Manual updating of firmware is available in the Phocus software, from version 2.7 Mac and 2.7 Windows. However, please use the latest version of Phocus for firmware updating. For Windows it is strongly recommended to use the 64 bit version.
– During the upgrade procedure do NOT disconnect the FireWire cable until prompted!
Télécharger