Hasselblad H1D Camera Body Firmware 9.5.1/1.1.1
Type de fichier: Firmware.
Système d’exploitation: AnyOS.
Nom de fichier: 131031.hbf.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
Ce paquet fournit les fichiers d’installation nécessaires de la version du micrologiciel Hasselblad H1D Camera Body 9.5.1/1.1.1.
Corrections:
– Prise en charge de the 3043356 Battery grip rechargeable 2900 / Li-Ion
Étapes d’installation:
1. In order to perform the update a compatible digital capture unit must be attached to the camera body. Compatible models are: Hasselblad CF, CFH.
2. Remove lens and viewfinder and connect the camera to the host computer using a FireWire cable.
3. Make sure the computer has a fresh battery or is powered from the mains supply.
4. Start Phocus and when the camera is connected, as indicated by an active camera icon in the top left part of the screen, select “Update Firmware…” from the “File“ menu.
5. Browse to the location where the update file was saved and follow the instructions on screen. The update procedure will take a few minutes to finish.
Avis important:
– During the upgrade procedure do NOT disconnect the firewire cable until prompted!
– Unintentionally removing the Firewire cable during the firmware download procedure could in worst case render the camera useless which would require the need for authorized service.
Télécharger