FUJINON XF16-80mmF4 R OIS WR Lens Firmware 1.04
Type de fichier: Firmware.
Système d’exploitation: AnyOS, Windows 8.
Nom de fichier: XFUP0037.DAT.
Bit: 64 Bit.
Licence: Gratuit.
Description
Changements:
– Fix of minor defects.
Précautions:
– Si la mise à jour du micrologiciel échoue, la caméra risque de ne plus fonctionner correctement dans certains cas. Carefully read the notes provided here.
– Utilisez toujours la batterie complètement chargée lors de la mise à jour du firmware de manière basique. Ne mettez jamais l’appareil photo hors tension et n’essayez jamais d’utiliser les commandes de l’appareil photo lorsque le micrologiciel est écrasé.
– You can update the firmware from old version directly to the latest one.
– Firmware updating requires approximately 60 seconds.
– Une fois le firmware mis à jour, certaines données de la version précédente ne peuvent plus être restaurées.
– Please check here if you encounter any problems.
Procédure de mise à jour du micrologiciel:
– Allumez la caméra.
– Press “MENU/OK” button and select “FORMAT” in the SET-UP menu.
– Press the selector button(up) to select “OK” and press the “MENU/OK” button.
– Then, the format will start.
– Turn the camera off after the format is completed.
– Put the formatted memory card to a card reader slot of your PC.
– Téléchargez le firmware and copy it to the card.
– Retirez la carte de la fente du lecteur de cartes une fois la copie terminée et déposez-la dans l’appareil photo.
– Allumez l’appareil photo en appuyant sur la touche “DISP / BACK” pour afficher l’écran à droite. Appuyez ensuite sur la touche “MENU / OK”
– Select the item into [LENS] to update the XF lens.
– Appuyez sur le bouton [OK] pour passer à l’étape suivante.
– Appuyez sur la touche [UP] pour sélectionner “OK”.
– Press the [OK] button and wait.
– The firmware update has been successfully completed.
– Turn the camera off
– Vérifiez le micrologiciel mis à niveau.
– Formatez la carte.
Télécharger