Fujifilm GFX100 Camera Firmware 2.00
Type de fichier: Firmware.
Système d’exploitation: AnyOS.
Nom de fichier: GXUP0003.DAT.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
Changements:
– Fix of minor bugs
Expanding the use of outstanding image technology based on unique color reproduction
1) Addition of the new Film Simulation modes: “CLASSIC Neg” mode, simulating color negative film traditionally chosen for snapshots and “ETERNA Bleach Bypass” mode, which simulates the film processing technique of the same name.
2) “Color Chrome Blue” is added, which adds depth to the color and tonal reproduction in blue skies and other primarily blue subjects.
3) Additional functions of GRAIN EFFECT (SIZE, ROUGHNESS).
Improving autofocus performance
1) Fast and highly-accurate phase-detection AF even in low-light conditions at -5EV.
2) Improvement of the Face / Eye AF performance. The face/eye detection accuracy and stability are improved when shooting multiple people, so as to make portrait photography easier than ever before.
3) Auto mode will be added to focus bracketing. Specify the starting and ending points and shooting interval, and the camera can automatically determine the number of frames and steps required.
Enabling video recording control from Gimbal / Drone via USB communications
– Combining the GFX100 with Gimbal / Drone that supports this function, will allow users to start/stop video recording, specify exposure settings for video (shutter speed, aperture value, ISO sensitivity, and exposure compensation), and make manual focus adjustments.
– Guilin FeiYu Electronic Technology Co. Ltd., Shenzhen Gudsen Technology Co., Ltd., SZ DJI Technology Co. Ltd. and ZHIYUN (alphabetical order) have announced the intention of offering compatible products.
Expanding various other functions requested by customers
1) The firmware will allow users to adjust exposure settings (shutter speed, aperture value, ISO sensitivity, exposure compensation) for still images from a computer when using software that supports some tether-shooting functions.
2) More photo-editing applications will support the import of rating information, assigned in camera.
3) “COMPRESSED” is added to RAW RECORDING.
Features RAW video data output to ATOMOS NINJA V field monitor-recorder
– GFX100 will be able to output maximum of 4K/29.97P 12bit RAW video data using HDMI to an ATOMOS NINJA V, in Apple ProRes RAW. New firmware for NINJA V will be released by ATOMOS. RAW video data gives maximum flexibility for exposure adjustment or color grading in post-production for professional videographers. Also, the simultaneous output of RAW with Film Simulation / F-Log / Hybrid Log-Gamma (HLG) is also available.
Précautions:
– Si la mise à jour du micrologiciel échoue, la caméra risque de ne plus fonctionner correctement dans certains cas.
– Utilisez toujours la batterie complètement chargée lors de la mise à jour du firmware de manière basique. Ne mettez jamais l’appareil photo hors tension et n’essayez jamais d’utiliser les commandes de l’appareil photo lorsque le micrologiciel est écrasé.
– La mise à jour du micrologiciel nécessite environ 90 secondes.
– Une fois le firmware mis à jour, certaines données de la version précédente ne peuvent plus être restaurées.
Instructions d’installation:
– Placez la carte mémoire formatée dans un lecteur de carte de votre PC / Mac.
– Téléchargez le firmware
– Copiez le fichier téléchargé sur la carte.
– Retirez la carte de la fente du lecteur de cartes une fois la copie terminée et déposez-la dans l’appareil photo.
– Utilisez une batterie complètement chargée. Si l’appareil photo s’éteint pendant la mise à jour du micrologiciel, cela ne fonctionnera pas bien.
– La durée de la mise à jour du micrologiciel varie en fonction de la capacité du micrologiciel, mais elle est d’env. 90 sec. Ne mettez jamais l’appareil photo hors tension et ne l’utilisez pas pendant la mise à jour du firmware.
– Allumez l’appareil photo en appuyant sur la touche “DISP / BACK” pour afficher l’écran à droite. Appuyez ensuite sur la touche “MENU / OK”
– Après avoir confirmé l’élément en tant que [CORPS] pour mettre à jour le boîtier de l’appareil photo, appuyez sur le bouton [OK].
– Appuyez sur le bouton [OK] pour passer à l’étape suivante.
– Appuyez sur la touche [UP] pour sélectionner “OK”.
– Appuyez sur le bouton [OK].
– La mise à jour du micrologiciel est lancée.
– La mise à jour du firmware prend environ 90 secondes.
– Lorsque cet écran apparaît, la mise à jour du firmware a été complétée avec succès.
– Mettez l’appareil photo hors tension.
– Vérifiez le micrologiciel mis à niveau.
– En suivant la procédure ci-dessus “Procédure de vérification de la version du firmware”, vous pouvez voir la version du firmware.
– Formatez la carte.
Télécharger