DisplayLink USB Graphics Pilote/Utility 9.1 M1
Type de fichier: Pilote.
Système d’exploitation: Windows 10, Windows 7, Windows 8, Windows 8.1.
Nom de fichier: DisplayLink USB Graphics Software for Windows 9.1 M1.exe.
Bit: 64 Bit.
Licence: Gratuit.
Description
This is the R9.1 M1 product release, the first maintenance release of 9.1 driver. It has been put through our full system tests and is suitable for deployment to end-users.
DisplayLink Software Release 9.1 delivers:
– Display layout provisioning for hotdesking/hoteling offices to allow IT-defined first-connect display relative positions.
– Windows 10 postponed installation: when pushing the MSI to users, driver will be updated straight away if no DisplayLink product is detected, or at the next machine reboot if a device is detected.
– Bug fixes
Issues fixed in 9.1 M1 release (9.1.1563.0/9.1.1561.0):
– Abnormal HDMI video on 2560×1440@75 mode for specific monitor when connected through PS176 converter. (29523)
– DL-6000 series: if 2 DisplayPort + 1 HDMI displays are connected to the chip and HDMI is removed during sleep, the matching DisplayPort output doesn’t light up at sleep recovery. (29625)
– Improvement: change audio output to laptop internal when DisplayLink video output is disabled. (29434)
Versions:
– Software Package Version: 9.1.1590.0
– DisplayLink Ethernet Driver Version: 9.1.1390.0
– DisplayLink Audio Driver Version: 9.1.1390.0
Windows 7 – Windows 8.1:
– DisplayLink Core Software Version: 9.1.1563.0
Windows 10 v1607 Build 14393 onwards:
– DisplayLink Graphics Driver Version: 9.1.1561.0
The DL-3xxx, DL-4xxx (where applicable) and DL-5xxx plus the associated software, is tested to meet the following compliances at the time of release:
– USB 2.0
– DisplayPort (source 1.2)
– DisplayPort ++
– HDCP 1.x over DP
– HDCP 1.x over HDMI
– HDCP 1.x over DVI
– HDMI (source 1.4)
The DL-6xxx plus the associated software, is tested to meet the following compliances at the time of release:
– USB 2.0
– USB 3.2
– DisplayPort (source 1.2)
– DisplayPort ++
– HDCP 1.x over DP
– HDCP 1.x over HDMI
– HDMI (source 1.4 and 2.0)
Devices supported:
– DL-6910 / DL-6950
– DL-5500 / DL-5700 / DL-5900 / DL-5910
– DL-41xx
– DL-3100 / DL-3500 / DL-3700 / DL-3900 / DL-3950
– DL115 / DL125 / DL165 / DL195
Pour installer ce package, procédez comme suit:
– Assurez-vous que toutes les exigences système sont remplies.
– Enregistrez le package téléchargeable dans un emplacement accessible (tel que votre bureau).
– Recherchez et double-cliquez sur le fichier que vous venez de télécharger.
– Autoriser Windows à exécuter le fichier (si nécessaire).
– Lisez le contrat de licence utilisateur final (CLUF) et acceptez de poursuivre le processus d’installation.
– Suivez les instructions à l’écran.
– Fermez l’assistant et effectuez un redémarrage du système pour que les modifications prennent effet.
Télécharger