Convergent Design Apollo Recorder Firmware 2016.01.1336
Type de fichier: Firmware.
Système d’exploitation: AnyOS.
Nom de fichier: Odyssey_2016.01.1336.zip.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
NEW FEATURES APOLLO & ODYSSEY7Q+/7Q WITH APOLLO OPTION
Dual-4K
– Monitor & Record two 4K/UHD video signals
– Supports 4K/UHD 23.98p, 24p, 25p, 29.97p, 30p
– Record in Apple ProRes (HQ/422/LT)
– Resolution & framerate must match
– 4K/UHD video only, no RAW conversion
Input Combinations (Apollo & Odyssey7Q+):
– HDMI + 3G-SDI Dual-Link (use SDI C & D inputs)
– HDMI + 6G-SDI (SDI B input)
– 3G-SDI Dual-Link (SDI A & B inputs) + 3G-SDI Dual-Link (SDI C & D inputs)
– 6G-SDI (SDI A input) + 3G-SDI Dual-Link (SDI C & D input)
– 6G-SDI (SDI A input) + 6G-SDI (SDI B input)
Input Combinations (Odyssey7Q):
– 3G-SDI Dual-Link (SDI A & B inputs) + 3G-SDI Dual-Link (SDI C & D inputs
Quad-HD 1080p 50/60 Support
– Monitor & Record up to four 1080p 50p, 59.97p, 60p video signals
– No recording of Quad-Split or Live-Switch when inputs are 1080p 50/59.94/60
– Both 3G level A and 3G level B supported
Input Combinations (Apollo & Odyssey7Q+):
– HDMI + 3x 3G-SDI
– 4x 3G-SDI
Input Combinations (Odyssey7Q):
– 4x 3G-SDI
4K 50/60p Support
– Monitor & Record 4K/UHD 23.98p, 24p, 25p, 29.97p, 30p, 50p, 59.94p, 60p
– Record in Apple ProRes (HQ/422/LT)
– 4x 3G-SDI required for 4K/UHD 50p, 59.94p, 60p
– Dual-4K not supported at 50p, 59.94p, 60p
– Supporting Sony F55 & IO Industries 4KSDI
– Set F55 to “2SI” output for 4K/UHD 50p, 59.94p, 60p
– Set IO 4KSDI to Quad-Link interleaved output for 4K/UHD 50p, 59.94p, 60p
Additional Apollo Functions
– Lower Toolbar full screen switching in Quad-Split or A/B/C/D recording modes
– Improved Monitoring Tool usage when not recording
– Program-Preview single-tap switching in Live-Switch mode (upon selection of new Program source, previous selection automatically becomes Preview)
– Input labeling (display as overlay on OLED and/or outputs)
NEW FEATURES APOLLO / ODYSSEY7Q+ (APOLLO OPTION NOT REQUIRED)
6G SDI Prise en charge de BlackMagic Design Cameras
– Monitor & Record 4K/UHD 23.98p, 24p, 25p, 29.97p, 30p
– Record in Apple ProRes (HQ/422/LT)
– Notes: 6G-SDI 75 Ohm cables required
– Notes: In Odyssey “4K ProRes 422” mode, only SDI A IN is 6G active
NEW FEATURES ODYSSEY7Q+/ODYSSEY7Q (APOLLO OPTION NOT REQUIRED)
4K 50/60p Support
– Monitor & Record 4K/UHD 23.98p, 24p, 25p, 29.97p, 30p, 50p, 59.94p, 60p
– Record in Apple ProRes (HQ/422/LT)
– 4x 3G-SDI required for 4K/UHD 50p, 59.94p, 60p
– Supporting Sony F55, Panasonic VariCam35 & IO Industries 4KSDI
– Set F55 & VariCam35 to “2SI” output for 4K/UHD 50p, 59.94p, 60p
– Set IO 4KSDI to Quad-Link interleaved output for 4K/UHD 50p, 59.94p, 60p
Quad-HD Monitoring
– Monitor only mode
FIXES & IMPROVEMENTS
– FIXED Rare Canon C500/C300 Mk II RAW->Apple ProRes frame issue
– FIXED Rare file corruption issue with Apollo recordings
– FIXED DPX Sony F35 Support
– FIXED SDI/HDMI Record Trigger from the Panasonic DVX200
– FIXED Apollo Option SDI B Out now carries audio
– FIXED HDMI source Time-of-Day timecode
– IMPROVED Playback without a connected source (all record modes)
– IMPROVED Camera Angle info added to metadata
– IMPROVED Playback Scrubbing artifacts in 4K
– IMPROVED Playback Scrubbing artifacts in all RAW modes
– IMPROVED Power saving for inactive ports
SOFTWARE
CD Apple ProRes Transfer Tool v2.2
– Improved Prise en charge de Apollo Apple ProRes files
– ADDED Camera Angle metadata
– FIXED Timecode Issue with Spanned Apollo Files
– Other minor fixes and updates
– Windows and Mac versions available
KNOWN ISSUES 2016.01.1335 Release:
– Record spanning from SSD 2 back to SSD 1 is no longer supported.
– 1.5G-SDI Quad-Link for 4K/UHD up to 30p is no longer supported (use 3G-SDI Dual-Link). 3G-SDI Quad-Link for 4K/UHD up to 60p is supported.
– Files recorded with previous firmware builds not compatible with 2016.01.
– During firmware update the OLED display may go black. To correct, connect a video signal to SDI A IN.
– When playing back short 50/60p files if “Skip Frames” is not set, static audio can occur. Recorded files are unaffected.
– In rare cases when switching frame rates on the FS700, a false camera trigger may occur, resulting in a 1 second file.
– When recording Sony FS 4K RAW-> 4K/UHD Apple ProRes at 50/59.94p, using Pixel Zoom will shift the image on OLED. Recorded files are unaffected.
– Canon RAW playback may be jumpy. To correct, select a point within the clip and press PLAY. If this does not correct issue, deselect clip then reselect.
– In Apollo mode, when using LTC In timecode source, cameras must be genlocked to prevent timecode drift.
– In Apollo mode, when using Pixel Zoom, on-screen camera angle labels may not be correctly aligned.
– In Apollo mode, Anamorphic Desqueeze is not available.
– Apollo Dual-4K does not support loss of source. If either video signal is lost the recording will stop.
FIRMWARE UPDATE INSTRUCTIONS
To update firmware on an Odyssey or Apollo device, a Convergent Design SSD or a qualified 3rd party SSD must be used. Note that previously recorded files will not be playable on the unit once updated, so all files on the SSD and any other SSDs must be downloaded before updating.
Steps to follow:
– ERASE & FORMAT the SSD on an Odyssey or Apollo.
– Mount this SSD to a computer using an SSD adapter/reader to USB-3 or Thunderbolt.
– Download the Firmware Update to a folder on the computer. Do not download directly to the SSD. Convergent Design recommends a copy of the firmware update be maintained on the computer for possible future use.
– On a Windows computer, unzip the download. Open the unzipped folder.
– On a Mac, the download will automatically unzip. Open the folder.
– Within the download folder, copy the
Télécharger