Cisco CVR100W Router Firmware 1.0.1.19
Type de fichier: Firmware.
Système d’exploitation: AnyOS.
Nom de fichier: CVR100W_FW_1.0.1.19.bin.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
The following new features were supported in firmware version 1.0.1.19:
– IPsec site-to-site VPN for setting up a single gateway-to-gateway VPN tunnel.
– IGMP Snooping and IGMP Proxy for both Ethernet ports and SSIDs.
– Port management for all Ethernet ports.
– Prise en charge de password complexity settings and verification.
– Configure Cisco-Simple-Connect wireless network on the Wireless > Basic Settings page.
The following problems were fixed in firmware version 1.0.1.19:
– CSCua38482 IGMP protocol packets cannot be forwarded between the wireless clients and the wired clients on the LAN side.
– CSCua96531 Fast repeated switching on and off of the Cisco-SimpleConnect function on the unit causes the WLAN to operate abnormally.
Procédure d’installation:
– Enregistrez le package téléchargeable.
– Connectez-vous à l’interface utilisateur Web du routeur.
– Accédez à la section de mise à niveau du micrologiciel de votre unité sans fil.
– Sélectionnez le firmware actuel et configurez votre routeur pour installer ce fichier.
– Attendez que l’appareil exécute ce processus.
– Redémarrez l’unité si nécessaire.
Télécharger