ASUS ExpertBook P2451FAW Intel Serial IO GPIO Pilote 30.100.1947.3 pour Windows 10 64-bit
Type de fichier: Pilote.
Système d’exploitation: Windows 10.
Nom de fichier: GPIO_DCH_Intel_Z_V30.100.1947.3_15479.exe.
Bit: 64 Bit.
Licence: Gratuit.
Description
Principales caractéristiques:
– Processor: Intel Core i3 10110U/10310U, i5 10210U, or i7 10510U/10610U
– Chipset: Integrated Intel CPU
– Memory: DDR4 2666MHz SDRAM, 2 x SO-DIMM socket for expansion, total up to 32 GB SDRAM, Dual-channel
– Display: 14.0″ (16:9) LED-backlit FHD (1920×1080) 60Hz Anti-Glare IPS-level Panel with 72% NTSC with wide 178° viewing angles
– Graphics: Integrated Intel UHD Graphics
– Hard drive: 500GB/1TB 5400 rpm SATA HDD
– Hard drive: 500GB/1TB 7200 rpm SSH
– Solid state drive: 128GB/256GB/512GB/1TB PCIe Gen3 x2 SSD M.2
– Solid state drive: 512GB/1TB PCIe Gen3 x4 SSD M.2
– Keyboard: Chiclet keyboard, Illuminated chiclet keyboard
– WebCam: HD 720p CMOS module
– Wi-Fi: Integrated Wi-Fi 5 (802.11 ac), Integrated Wi-Fi 5 (802.11 ac (2×2)), Integrated Wi-Fi 6 (802.11 ax (2×2))
– Bluetooth: Bluetooth 5.0
Ce paquet contient les fichiers nécessaires à l’installation du pilote Intel Serial IO. S’il a été installé, la mise à jour (installation par écrasement) peut résoudre les problèmes, ajouter de nouvelles fonctions ou développer celles qui existent déjà. Même si d’autres systèmes d’exploitation sont également compatibles, il est déconseillé d’appliquer cette version aux autres plates-formes spécifiées.
Driver Installation via Installer:
– Copy and unzip the Intel Serial IO Driver onto the Platform under test.
– Locate the “SetupSerialIO.exe” file.
– Right click on the executable and select ‘Run as administrator’ option from the menu to start the installer and then click on ‘Yes’ button in User Account Control pop-up window.
– You should see welcome screen with component details. Click ‘Next >’ button to continue the installation.
– Next, you should see license agreement screen. Please review the license agreement and if you accept the license terms then check the check-box on “I accept the terms in the license Agreement” and click on the “Next >” button to continue the installation.
– Next, you can select the folder location where the driver will be installed. By default, the driver will be installed in c:program FilesIntelIntel Serial IO. Click on “Next >” button to continue installation.
– Next, a list of driver components that will be installed by the installer is displayed. Click on ‘Next >’ button to continue.
– After successful installation, you should see setup completion screen. Click on ‘Finish’ button to complete the installation.
Silent Driver Installation via Installer
– Copy and unzip the Intel Serial IO Driver onto the Platform under test.
– Open a Command Prompt (cmd.exe) with administrator rights (ie. Run as administrator). Click on ‘Yes’ button in User Account Control pop-up window.
– Change the directory to where you unzipped the driver in Step 1 and then change to the “Driver_Installer” directory.
– To see all available options for the Installer, run command “SetupSerialIO.exe -?”
– You should see a window pop-up. For the “-l <LCID>” option which specifies the language of the setup dialogs, the LCID list is shown in below table. Click OK to continue.
– Run command “SetupSerialIO.exe –b –s” to start the silent installation. (Where as x represents the particular version number.) This process should take about 1 min to complete. When silent installation is complete, the system will automatically reboot.
– After the system has booted, you can refer to section 0 to check the driver version.
Manual Installation via INF File:
– Copy and unzip the Intel Serial IO Driver onto the Platform under test.
– Locate the INF files. (iaLPSS_GPIO.inf, iaLPSS_I2C.inf, iaLPSS_SPI.inf, iaLPSS_UART2.inf)
– Right click on the INF file and select ‘Install’ option from the menu to start the installation and then click on ‘Yes’ button in pop-up window.
– After the installation of all the drivers, reboot the system.
Télécharger