AGERE ET-131x PCI-E Gigabit Ethernet Pilote 1.0.1.84
Type de fichier: Pilote.
Système d’exploitation: Windows Vista.
Nom de fichier: ET131x_drv10184.exe.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
Agere Systems’ ET1011C is a Gigabit Ethernet transceiver fabricated on a single CMOS chip. Packaged in either an 128-pin TQFP, an 84-pin MLCC, or a 68-pin MLCC, the ET1011C is built on 0.13�m technology for low power consumption and application in server and desktop NIC cards. It features single power supply operation using on-chip regulator controllers. The 10/100/1000Base-T device is fully compliant with IEEE� 802.3, 802.3u, and 802.3ab standards.
The ET1011C uses an oversampling architecture to gather more signal energy from the communication channel than possible with traditional architectures. The additional signal energy or analog complexity transfers into the digital domain. The result is an analog front end that delivers robust operations, reduced cost, and lower power consumption than traditional architectures.
Il est fortement recommandé de toujours utiliser la version de pilote la plus récente disponible.
N’oubliez pas de consulter notre site aussi souvent que possible afin de rester à jour sur les derniers pilotes, logiciels et jeux.
Essayez de définir un point de restauration système avant d’installer un pilote de périphérique. Cela vous aidera si vous avez installé un mauvais pilote. Des problèmes peuvent survenir lorsque votre périphérique matériel est trop ancien ou n’est plus pris en charge.
Télécharger