Drivers.Plus

Hello,

Following the purchase of a computer without os, I downloaded and create a USB key to install Windows 10 family on the PC.
After installation, the network card is not detected and an error message concerning the installation of the corresponding drivers is displayed: No network is detected despite a functional Ethernet connection.
After reinstalling the drivers for the Gigabyte Z390 Gaming X motherboard, and Windows 10 and its drivers, the problem persists.

Thank you.

Hello,

Click Windows key + R
Then enter -> devmgmt.msc and click OK.

Do you have anything in the section -> other devices?

What do you have anything in network cards?

Windows 10 is 32 or 64 bit?

Thanks!! In the other devices section I have:
- PCI data acquisition and signal processing controller;
- SM bus controller;
- Ethernet controler;
- Simplified PCI controller;
- Unknown device;
- PCI device;
- PCI device;
All with malfunction symbols indicating that the drivers for this device are not installed code 28
I've Windows 10 64 bit.

Hello!

Use another pc and:
1) Download this driver -> Ethernet. (Gigabyte Official).
2) Put it on a usb stick.
3) Transfer it to your pc.
4) Do the installation.

For the other missing drivers, check this page - >> HERE << -

Regards, Roza.