I can't see my graphics card in the device manager panel.
I only have the default motherboard intergrated video card. Suddenly I tried to update the driver nvidia from the manufacturer's site, but impossible to install the driver, because I have an error message: the hardware is not detected.
I came across the forums on the command to execute in cmd:
bcdedit / set pciexpress forcedisable
But here too when restarting always the default card.
I was see in the bios, advance / primary graphics is on PCI first.
I then updated the BIOS and I disassembled, reassembled my graphics card. But still this default map in the config panel, even when showing hidden devices.
I then did a system restore, it changes nothing.
I wonder if it is possible to "ping" my graphics card in cmd, see if it is recognized?
Its fan turns in any case.
My motherboard is an Asus M5A78L-M-LX3 and I'm on Windows10.
I have no more ideas, I don't know what to do more.
I read you thanks to the vga while waiting to find the hdmi.
Thank you for your advice.
First of all, before coming to ask for your help, I looked everywhere for a solution to my problem, but I don't really know where my problem comes from,...
I have a small problem since yesterday my nvidia graphics card bug preventing me from playing.
So I went to the device manager and it suggested that I have...
Last post
Ivan, hello!
Try to uninstall all drivers and install this one: (Nvidia Official)
I will explain my problem to you. I have an aorus rtx 2070 super graphics card,
I updated Windows yesterday and since then, my graphics card is disabled...
Last post
Try to uninstall old drivers and reinstall drivers from this link (Nvidia Official).
Hello, I'm on X10, my old CG has burned out so I ordered a new used CG (MSI Armor Radeon rx 570).
Here is the problem :
rx-570.jpg
I started by believing that...
Last post
Try to delete your rx 570 driver and install this one:
I am under Windows 7 (on a PC from 2008, originally Vista) and would like to switch to Windows 8.1, because the support for Windows 7 is finished.
Windows...
Last post
Hello,
I strongly advise you to upgrade directly to Windows 10. You can open the execute window with the Windows + R key combination, type dxdiag then press OK....