Following the purchase of a computer without os, I downloaded and create a USB key to install Windows 10 family on the PC.
After installation, the network card is not detected and an error message concerning the installation of the corresponding drivers is displayed: No network is detected despite a functional Ethernet connection.
After reinstalling the drivers for the Gigabyte Z390 Gaming X motherboard, and Windows 10 and its drivers, the problem persists.
Thanks!! In the other devices section I have:
- PCI data acquisition and signal processing controller;
- SM bus controller;
- Ethernet controler;
- Simplified PCI controller;
- Unknown device;
- PCI device;
- PCI device;
All with malfunction symbols indicating that the drivers for this device are not installed code 28
I've Windows 10 64 bit.
Use another pc and:
1) Download this driver -> Ethernet. (Gigabyte Official).
2) Put it on a usb stick.
3) Transfer it to your pc.
4) Do the installation.
For the other missing drivers, check this page - >> HERE << -
I have a problem to install driver wifi hp compaq cq58-350ek netbouk pc.
I have windows 7 32 bit and it does not show the message at the peripheral level...
Last post
Lack of info regarding the wireless card.
But questions must be answered!
It is possibly one of these 2 drivers:
-> Atheros (Drivers.plus)
-> Ralink (Drivers.plus)
Hello, I'm on X10, my old CG has burned out so I ordered a new used CG (MSI Armor Radeon rx 570).
Here is the problem :
rx-570.jpg
I started by believing that...
Last post
Try to delete your rx 570 driver and install this one:
I have a problem:
I am with Windows Vista 32 bits and the driver of my network card indicated: code 10, This device does not want to start.
I...
Last post
Hello,
Download this driver (Realtek CZ).
Unzip the file you just downloaded to a folder, to install it go to the device manager right click on your network card...