Matshita BD-MLT UJ260B Driver

Send your request for drivers, firmware, bios and utilities.
Post Reply
archi
Posts: 75
Joined: 09 Dec 2018, 15:36

Matshita BD-MLT UJ260B Driver

Post by archi »

Hello,

Since I finishied the installation of WINDOWS 10 instead of WINDOWS 8 pre-installed on my laptop TOSHIBA SATELLITE P850-31T, the DVD-CD-ROM "MATSHITA BD-MLT UJ260B" is no longer readable on the workstation, when I try to turn it on.

In the device manager I got:
"Windows can not boot this hardware device because its configuration information (in the registry) is incomplete or corrupt (Code 19)"
On the other hand I checked that the driver was up to date.
As previously suggested, I uninstalled the driver and then "look for changes to the hardware".
without results.
Thanks for your advices!
User avatar
roza
Posts: 339
Joined: 09 Dec 2018, 15:43

Post by roza »

Archi, hello!

Maybe you try to delete Upper and Lower filters?
1. Create new file "delete-filters.inf" with this code:

Code: Select all

; Change of register

[version]
Signature="$CHICAGO$"
SetupClass=BASE 

[DefaultInstall]
delreg=CLES 

[CLES]
HKLM,SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318},upperfilters
HKLM,SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318},LowerFilters
2. Put it on the desktop.
3. Right click on the file
Click on -> Install.
4. Restart the pc.

It should help.
Post Reply
  • Similar Topics
    Replies
    Views
    Last post