Yamaha SP2060 Processor Firmware 1.33
Tipo de archivo: Firmware.
Sistema Operativo: Windows 10, Windows 7, Windows 8, Windows 8.1.
Nombre del archivo: dme_frm387.zip.
Bit: 64 Bit.
Licencia: Gratuito.
Descripción
Este paquete proporciona los archivos de instalación necesarios de la versión Yamaha SP2060 Processor Firmware 1.33.
Correcciones:
– Fixed a problem in which after a scene was recalled, the notice of a parameter change (PRM command) may not have been be transmitted.
– Fixed a problem in which after power-on, a latency gap of 1 sample may have been introduced between the analog input channels.
Noticia importante:
– The hardware specification for DME Firmware V3.5x or earlier differs from the one for Firmware V3.8x or later. Therefore firmware V3.5x or earlier cannot be upgraded to V3.81 or later. Also, firmware V3.81 or later cannot be downgraded to V3.5x or earlier. (This does not apply to the SP2060 or ICP1.)
– If you need to upgrade your DME from V3.55 or earlier to V3.81 or later, please contact your Yamaha dealer.
– Save an up-to-date DME project file (*.daf). Don’t update unless an up-to-date “.daf” file has already been saved on your computer. Without the “.daf” file, you will not be able to restore DME operation.
– When DME64N/24N units running firmware version 3.5x or earlier and DME64N/24N or DME Satellite units running firmware versions 3.81 or later are combined in the same device group, DME64N/24N units running firmware version 3.5x or earlier cannot be designated as the group master.
Pasos de instalación:
– For installation, you need to download and use DME Designer
Descargar