Xiro XPLORER V Camera Firmware 4.9.1_150827
Tipo de archivo: Firmware.
Sistema Operativo: AnyOS.
Nombre del archivo: attac-UG3300EN_FW_4.9.1_150827.rar.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
Correcciones:
– Add a procedure of repairing the darker light dot
– Change the video resolution from 1280*720 30fps to 1280*720 60fps
Upgrade of the XPLORER Gimbal:
1. Download the files of “UG3300_PTZ_FW_1.0.0_xxxxxx.bin»
2. Open the folder of “XIROAssistant”
3. One end of the USB data wire plugs into the Micro-USB port of the drone; (Note: Carefully plug-in);
4. The other end of it plugs into a USB port of the PC;
5. Long press the triangle switch on the top of the drone until the green light on. (The pressing time should not exceed 3 seconds, or it will be turn into shutdown state);
6. Open the “XIROAsistant”, and then select “UPGRADE”;
7. And the sign of “USB is Connected” will display in the screen, please click “Ok”, and the system will jump into upgrade interface automatically;
8. Click “Select Firmware” at the upgrade interface, find the firmware of UG3300_PTZ_FW_1.0.0_xxxxxx.bin downloaded from the official website, and the gimbal will start to upgrade automatically;
9. Select “Finish” to log out the upgrade mode;
10. Long press the triangle switch on the top of the drone until the green light off, and the upgrading will be down after pulling out the USB data wire.
Descargar