TRENDnet TEW-WLC100P v1.0R Controller Firmware 2.03.b03
Tipo de archivo: Firmware.
Sistema Operativo: AnyOS.
Nombre del archivo: fw_tew-wlc100p_v1(v2.03b03).zip.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
Firmware Upgrade Procedure
– Save the downloaded firmware file to your PC
– Right click on the downloaded file and select Extract All or Extract Here option
– Make sure to remember the location where the extracted file will be saved.
– Log into to the router’s configuration page.
– Click on the Tools and click on Upload Firmware.
– Depending on your web browser, in the Upload Firmware section, click Browse or Choose File.
– Navigate to the folder on your computer where the unzipped firmware file (.bin) is located and select it.
– Click Apply. If prompted, click Yes or OK. Wait until the firmware upload completed and the device reboots.
– To finalize the firmware update process you must reset the device to factory default settings.
– Log back into the device, click on the Tools and Settings Management section. Under Restore Factory default click on Restore Device.
– Note: You will need to reconfigure and access the router’s management page using the predefined settings found on the top or bottom labels.
NOTA:
Firmware upgrade failure may permanently damage the unit and cause it to malfunction. Do not interrupt the firmware upgrade process by disconnecting it from the network or unplugging its power from the power outlet once the firmware upgrade process has begun. Never perform a firmware upgrade over wireless connections or via remote access connections. If the items listed in the release notes do not address an issue you are experiencing, please do not upgrade the firmware.
Descargar