SIGMA fp Camera Firmware 2.02
Tipo de archivo: Firmware.
Sistema Operativo: AnyOS.
Nombre del archivo: FP__V202.BIN.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
Cambios:
– Corrected the bug related to Compressed RAW over HDMI recording with Atomos NINJA V monitor-recorder. [ISO metadata reported in Final Cut Pro X may occasionally be incorrect if using 1/3 EV ISO adjustments on the camera. Note: Requires the firmware of NINJA V to be Ver.10.53 or later.
]
– Corrected the bug related to the electronic image stabilization system in CINE mode. [Video footage appears distorted in the following conditions. Stopping the video recording using the shutter button when the electronic image stabilization system is turned “ON” and the shutter button function is set to “REC” in CINE mode.]
Caution (Firmware update):
– If the camera is turned off during the update procedure, it might cause a malfunction and damage your camera.
– Please use a dedicated AC adapter or a fully charged battery.
– Do not open the BATTERY/CARD COVER or operate the camera during the firmware update.
– Do not turn off the camera during the firmware update.
How to update the firmware:
– Use SD/SDHC/SDXC card and format the card in the camera body.
– Please connect a card reader containing the SD/SDHC/SDXC card or the camera to your computer and download the firmware file in the SD/SDHC/SDXC card root directory (Please do not store the file in a subfolder such as “DCIM”).
– Insert the SD/SDHC/SDXC card storing the firmware file of .BIN into your camera and turn on the camera.
– Press the MENU button on the back of the camera to display the Camera Set-up Menu.
– Select “Firmware Update” from the Set-up Menu.
– Press the OK button again to display the firmware update window.
– The installed firmware information is displayed.
– “Start Firmware update?” message will be displayed.
– Select “Yes” and then press the OK button to start the firmware update. Firmware update will now start.
– There will be two firmware updates. 5 seconds after starting the first update, the camera body will turn off automatically, and 3 seconds later it will turn on again to start the second update. In case the camera does not restart, turn on the power to resume the update. It takes about 1 minute as a total to update.
– When the message “Firmware update is complete. The camera will be turned off automatically.” is displayed, the update is complete.
– Select the “Information” from the Set-Up menu and confirm the firmware has been updated to successfully.
Descargar