Panasonic KX-TGP500B01 SIP Phone Firmware 22.68
Tipo de archivo: Firmware.
Sistema Operativo: Windows 7, Windows Vista, Windows XP.
Nombre del archivo: TGP5xx-DECT-22.68_HW1.fw.
Bit: 64 Bit.
Licencia: Gratuito.
Descripción
Additions
:
– Added the following languages on the display: Polish, Romanian, Czech, Slovak, Bosnian, Portuguese, Swedish, Norwegian, Danish, Finnish
– Added the following languages on Web Interface. Polish, Romanian, Czech, Slovak, Portuguese
– Added the option to display the number of voice mails on the display.
Added the parameter:VM_COUNT_ENABLE
Y(Enable) N(Disable:Default)
– Added the call rejection function by pressing [OFF] key.
– Added the parameter to specify the response code to reject receiving calls.
Parameter:SIP_RESPONSE_CODE_CALL_REJECT
Value Range:400-699
– Added the function to transfer the holding call.
Added the parameter:HOLD_TRANSFER_OPERATION
Y(Enable) N(Disable:Default)
– Enabled to send DTMF following “Pause Dial” after the called party answers.
– Added the option to ring a local Ring Back Tone(RBT) when 180 is received after the early media is established.
Added the parameter:RINGTONE_183_180_ENABLE
Y(Enable) N(Disable:Default)
– Enabled to call back with the number with “+” when redialing for an international call.
– Enabled to input “@” at the Authentication ID and Password on the handset.
– Added the softkey [CALL] to send the dial immediately for the second dial.
– Changed the value range of RTP port.
RTP_PORT_MIN value range:1024–59598
RTP_PORT_MAX value range:1424–59998
– Enabled to overwrite the Web settings by provisioning.
Added the parameter:MAINTENANCE_WEB_RESET_ON_STARTUP
Y(Enable) N(Disable:Default)
Regarding Web settings possible to overwrite, refer to “4.3.5 Provisioning Settings” in Administrator Guide.
– Added the option to send a request when 403 Forbidden reply is received from the server in response to INVITE or SUBSCRIBE.
Added the parameter:SIP_403_REG_SUB_RTX_n (n=1 to 8)
Y:Enable(Send) N:Disable(Default,Not Send)
– Improved that the parameter:SHARED_CALL_ENABLE_n is set to “N” in case of NULL.
Descargar