Nikon Z 7 Camera Firmware 2.10 para macOS
Tipo de archivo: Firmware.
Sistema Operativo: Mac.
Nombre del archivo: F-Z7-V210M.dmg.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
Se corrigieron los siguientes problemas:
– Added supported for optical VR with NIKKOR Z DX 16–50mm f/3.5–6.3 VR and NIKKOR Z DX 50–250mm f/4.5–6.3 VR Z-mount lenses. Note that attaching these lenses disables the Mechanical shutter option for Custom Setting d5 (Shutter type) in Group d (Shooting/display) of the CUSTOM SETTING MENU, leaving a choice of Auto and Electronic front-curtain shutter options only.
– ISO sensitivity can now be adjusted using the lens control ring, and ISO sensitivity has been added to the options available for Custom Setting f2 (Custom control assignment) > Lens control ring in Group f (Controls) of the CUSTOM SETTING MENU.
– As of November 14, 2019, the aperture display in the lens info panel for NIKKOR Z 24–70mm f/2.8 S and NIKKOR Z 58mm f/0.95 S Noct lenses shows both the current aperture and adjacent aperture values in modes A and M.
– When On was selected for Auto ISO sensitivity control and an option that does not include “slow sync” was selected for Flash mode, shutter speed was formerly restricted to values between those chosen for Custom Settings e1 (Flash sync speed) and e2 (Flash shutter speed), but this has now been changed to match the behavior of digital SLR cameras, with the result that the minimum shutter speed now corresponds to the value selected for Auto ISO sensitivity control > Minimum shutter speed.
– Fixed an issue that in extremely rare cases resulted in the camera failing to correctly record movies with 1920×1080; 120p selected for Frame size/frame rate.
– Fixed an issue that occasionally resulted in “noise” in the form of white lines at the bottom of the display when the electronic viewfinder was on.
– Fixed an issue that in rare cases resulted in “noise” in the form of fine horizontal lines appearing throughout the frame in movies and the live view display.
– Fixed errors in the UTC time zones for the following three cities in the Time zone and date > Time zone display in the SETUP MENU: Caracas: was -4:30, is now -4:00 / Casablanca: was 00:00, is now +1:00 / Ankara: was +2:00, is now +3:00
– Fixed an issue that resulted in an incorrect date of creation being displayed in the Windows 10 “properties” dialogs for movies and time-lapse movies created with the camera, as well as copies created with camera movie editing controls.
Viendo la versión de firmware de la cámara:
– Enciende la cámara.
– Presione el botón MENÚ de la cámara y seleccione Versión de firmware en el MENÚ DE CONFIGURACIÓN para mostrar la versión del firmware de la cámara.
– Verifique la versión del firmware de la cámara.
– Apague la cámara.
Actualización del firmware de la cámara:
– Cree una carpeta en el disco duro de la computadora y asígnele el nombre que desee.
– Download the file to the folder newly-created.
– Extract the file to a folder named “Z7Update”
– Using a card slot or card reader, copy the .bin to a memory card that has been formatted in the camera.
– Note: Be sure to copy the firmware to the root (top-most) directory of the memory card. The camera will not recognize the new firmware if it is placed in a folder under the root directory.
– Insert the memory card into the camera and turn the camera on.
– Seleccione la versión de Firmware en el MENÚ DE CONFIGURACIÓN y siga las instrucciones en pantalla para completar la actualización del firmware.
– Una vez que se complete la actualización, apague la cámara y retire la tarjeta de memoria.
– Confirme que el firmware se ha actualizado a la nueva versión.
Descargar