Intel R1304WF0YS Server System BIOS/Firmware 00.01.0004
Tipo de archivo: Firmware.
Sistema Operativo: AnyOS.
Nombre del archivo: S2600WF_EFI_BIOSR0004_ME04.00.03.219.0_BMC1.04.f80688d0_FRUSDR1.04.zip.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
Versiones:
– System BIOS – 00.01.0004
– ME Firmware – 04.00.03.219
– BMC Firmware – 1.04.f80688d0
– FRUSDR – 1.04
Correcciones:
– [S2600WF] «IPMI Power soft» command not work when Set «Power Button Action» from «Do nothing» to «Shutdown» under Windows 2016.
– The latest S2600BP SFP+ mainboard (J36547-301) NIC 1 and 2 is inverse with actually using
– [S2600BP] «IPMI Power soft» command not work when Set «Power Button Action» from «Do nothing» to «Shutdown» under Windows
– [S2600ST] «IPMI Power soft» command not work when Set «Power Button Action» from «Do nothing» to «Shutdown» under Windows 2016.
– HSD-ES: 2006649895, , FRB2 Asserted during system boot when 7 QLogic PCI cards are inserted on the system.
– HSD-ES: 1504396363, , BIOS should include production key when secure boot enabled.
– HSD-ES: 2006650537, , [S2600BP]DMI Information for the network device is not correct. «enp» as oppose to «eno».
– HSD-ES: 1504403422, , Update ME FW to the new version.
– HSD-ES: 1504531663, , [PC Stitching] Sync Microcode 0x26 for SKX H0 from RP.
– HSD-ES: 1504521876, , [S2600BP]NVMe U.2 SSD can’t be detected or link speed/width downgrade during reboot cycling.
– HSD-ES: 2103617966, , [S2600WF] The warning message is incorrect when set Admin/User PWD the same.
– HSD-ES: 1504521041, , [S2600BP]Syscfg_V14_1:Command:syscfg /bldfs «» and F9 load different Bios default Boot Order.
GENERAL INSTALLATION PROCEDURE
1. Unzip the contents of the update package and copy all files to the root directory of a removable media (USB flash drive)
2. Insert the USB flash drive to any available USB port on the system to be updated
3. Power on the server and load the uEFI shell
4. Begin the update process running the Startup.nsh
5. Reboot the system after the update process has successfully completed
Web GUI update
1. Unzip the package onto your system
2. Log into the BMC web GUI
3. Navigate to Configuration, then Firmware Update
4. Click browse, and direct the browser to the location of Purley_1.04.f80688d0.bin
5. Click upload. Progress and status will be shown as the update progresses
UEFI update
1. Unzip package and load onto a flash drive
2. Boot to UEFI shell, and navigate to the folder where this package lives
3. Run fwUpdateBMC.nsh and follow the prompts
Verifying Updates:
01. After the final update has completed successfully, reboot the system
02. During POST, hit the <F2> Key when prompted to access the BIOS Setup Utility
03. From the BIOS Setup Utility main menu, hit the <F9> key to load BIOS defaults
04. Hit the <F10> key to Save Changes and Exit the BIOS defaults
04. At the main menu verify the BIOS revision is correct
05. Move cursor to the SERVER MANAGEMENT menu and hit Enter
06. Move cursor to the SYSTEM INFORMATION Option and hit Enter
07. Verify the BMC Firmware revision is correct
08. Verify the SDR revision is correct
09. Verify the ME Firmware revision is correct
10. Configure desired BIOS Option settings
11. Hit the F10 Key to Save Changes and Exit
Descargar