Intel 6GB SAS Hardware RAID Firmware Flash Update 12.13.0-0154
Tipo de archivo: Firmware.
Sistema Operativo: AnyOS, Windows 10, Windows 7, Windows 8.
Nombre del archivo: IR3_2108SASHWR_FWPKG-v12.13.0-0154.zip.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
Fixes
:
– Invalid target ID after new logical drive creation
– Compatibilidad con mutlipath topology is broken
– OEM on iMR FW update caused card to FW fault state and card cannot boot to OS
– OEM Rack BMC see clock stretching on I2C bus
– adapterOperations.alarmControl is being set to 1 even if controller does not have alarm on board
– Drive temperature is shown very high on Falcon
– 9260-16i’s drive locate/fault LED header doesn’t work
– Firmware halts when flashing components other than app.rom for OEM=9
– PL library and files checking for PL version 5.38
– Not able to flash both 9265-8i and 9285-8e card with 5.3 patch 1 firmware. However, it is ok on 9266-8i
– Dont interpret the cachecade BVD flags if the volume is created with old FW which does not support cachecade
– Data Corruption during Raid Level Migration
– MR5.4 – DATA Corruption – offline drive becomes automatically online during Raid Level Migration
– VD is degraded(automatically) after raid level migration R1 TO R5 (adding one drive)
– Firmware enters megamon by system reboot after changing MFC OEM to 6
– Set the Recovery mode page (WriteRetryCount and recoveryTimeLimit)
– Current Access policy is not getting updated for iMR
– Unable to open «Set Patrol Read Properties» in MSM with 2008-iMR
– Data Corruption during Raid Level Migration
– Add support for Ringbuffer and Dq compilation
– disableHII: Needs to be updated from nvdata into MFCD
– 9240-4i on BCM RX67Q-6S motherboard is not getting required memory resources on boot, on Linux it waits 5 minutes, resets the
– multi path with Consistency Check LED behavior problem
– Address Action Item SCGCQ00340495 (Check coding standard for structure OfuRequestState)
– Unable to enable ocr using application due to FW ocr setting taking precedence
– Compatibilidad con mutlipath topology is broken
– Bad disk being serviced hung Linux boot for 2 hours
– During Reconstruction (R0->R5) when system reboots the reconstruction doesnt resume. System hangs Megamon hit
– Auto Foreign import fails when controller is booted with pinned cache.
– Provide the count of LBAs that are present in the sata bbm table
– Enable or disable 512E using Applications
– Fail the IO in case the medium error recovery is taking more time
– Hii enter black screen/timeout when user switching between fields/form sub_form and during Pd rebuild
– Remove debug message which is not applicable for non Mercury customers
– Change the showSgpio activity to 0
– Need OEM’s «showSgpioActivity» setting set back to 0
– Code review: correcting the delivery error
– Change BBU Mode description for Liberator batteries.
Versiones:
– Package: 12.13.0-0154
– Firmware: 2.130.383-2315
– FCODE: 4.12.05.00
– UEFI_Driver: 0x05270000
– BIOS: 3.27.00
– Hii: 01.36.00
– NVDATA: 2.09.03-0045
-WebBIOS: 6.0-51-e_47_Rel
– PCLI: 4.04.20
– Medusa_Expander: SAS2XFW-25.05.04.00_MFGIMG-25.05.04.00
– ROMENV: 1.08
– BootBlockCommon: 09.250.01.219
– BootBlock: 2.02.00.00-0000
This driver is valid for the products listed below:
– Intel Integrated RAID Module RMS2MH080
– Intel RAID Controller RS2BL040
– Intel RAID Controller RS2BL080
– Intel RAID Controller RS2MB044
– Intel RAID Controller RS2PI008
– Intel RAID Controller RS2SG244
– Intel RAID Controller RS2VB040
– Intel RAID Controller RS2VB080
– Intel RAID Controller RS2WG160
– Intel RAID Controller RT3WB080
Descargar