Humax HD Fox-T2 Digital Recorder Custom Firmware 1.02.20_mod_2.20
Tipo de archivo: Firmware.
Sistema Operativo: AnyOS.
Nombre del archivo: HD_FOX_T2_1.02.20_mod_2.20.zip.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
Install Firmware:
– Descargue el firmware and, if it is a zip file, extract it
– Ensure the resulting file is named HD_FOX_T2_Upgrade.hdf
– Place the file in the root of a FAT32 formatted USB Flash / disk Drive *
– Put the unit into standby using the remote, or power button on the front
– Plug the USB Flash device into the USB port
– Turn on the TV and switch to the Humax input
– Press and hold down the power button on the front until you see the software update begin, and the progress is shown on the TV screen
– The initial download is very quick and then programming takes 2-3 minutes
– Pauses in the percentage time bar are quite normal
– When the update is complete End will appear on the front display and Success Downloading! will appear on the TV
– Unplug the USB Flash Device and delete the HD_FOX_T2_Upgrade.hdf file
– Reconnect a USB Flash / Hard Disk drive formatted in EXT2 / EXT3
– Press the power button on the front to restart with the new firmware
Note:
The HD Fox T2 requires a USB Flash / Disk Drive with a minimum of 2GB to be connected when operating with Custom Firmware otherwise it will not be possible to install additional software packages, Flash devices must be formatted in EXT2 using a P.C. program such as GParted “Live” CD, Hard Disk devices can be formatted in EXT3 by the HD FOX T2
Some USB Flash / Disk Drives are reported not to work, The reason for this is not fully understood, However the following Tips are known to help:
– Ensure no other USB devices are connected
– Do not use a USB extender cable
– Removing all other files / full-formatting can prevent file fragmentation
– Try both USB ports (HDR)
– Smaller capacity drives seem to work more successfully than large ones
– Last Resort, Try a different USB Flash Drive
Descargar